can it be this easy to make a "custom" turbo kit?

[Yoda]

Get the zage kit from MI and call it a day. Going custom is not as difficult as it use to be there are many diy on it.

[Golddeenoh]

Originally Posted by Yoda

Get the zage kit from MI and call it a day. Going custom is not as difficult as it use to be there are many diy on it.

sure i suppose i could do that and add the wiring harness and AEM FIC to bring up to $2488 or see if i can build a kit that works and has red silicone instead of the blue ones especially if the car is red, the blue might clash a little. and with as much feed back and information on going turbo there is on this forum and the MI forum it should be fairly easy to get together and running good. not to mention that i would also have to hit up Garm for low compression pistons and H or I beam connecting rods. so save the 800 or so difference and Invest it into the bottom end.