Hella horns installed

[hw6515]

does anyone knows if the kit from MI comes will everything need it for the installation?

http://shop.microimageonline.com/Hel...-003399801.htm

[CTScott]

Originally Posted by hw6515

does anyone knows if the kit from MI comes will everything need it for the installation?

http://shop.microimageonline.com/Hel...-003399801.htm

You really don't need much to install them. At most you will need a bolt for the second horn mounting hole on the upper radiator frame (you reuse the one that the OEM horn is mounted with, but there is a second threaded hole next to it that you mount the second horn to), and one ring terminal to crimp onto the two ground wires for the two new horns, and then slip under the head of one of the mounting bolts.

[thatbryanguy]

Originally Posted by hw6515

does anyone knows if the kit from MI comes will everything need it for the installation?

http://shop.microimageonline.com/Hel...-003399801.htm

I mounted one using the stock horn position then drilled a hole and bolted the other on in evenly spaced on the other side of the Toyota sambrero emblem. Just get some wire and a soldering iron and its super easy to set it all up. The MI set comes with the two horns, a relay and a generic install guide iirc. I found a really easy to follow diagram for an "electrically challenged newb" like me. All laid out. I'll see if I can get a link to it

In response to performance, there are many aspects to "performance" than just Hp and torque. These horns always impress my friends when I get them to get close to see what they see in the grill then I hit the horn hah. It definitely outperforms the stock horn and gets people to hear you coming when they cut you off.