Replacing A/C Compressor (depressurizing system?)

[CTScott]

Originally Posted by winston856

I just wonder if the system is still pressurized after 4+ years of non use. I didn't want to start disassembling it and get sprayed, don't know if that would even happen

You can verify that by turning AC on and looking a the sight glass on the aluminum tubing. If you don't see any bubbles, then it is likely empty.

To verify that before disconnecting the tubing, you can remove the cover from the valve on the low pressure line (the larger diameter tubing) and pressing the center of the valve for a split second. If nothing comes out it is empty.

[winston856]

Originally Posted by CTScott

You can verify that by turning AC on and looking a the sight glass on the aluminum tubing. If you don't see any bubbles, then it is likely empty.

To verify that before disconnecting the tubing, you can remove the cover from the valve on the low pressure line (the larger diameter tubing) and pressing the center of the valve for a split second. If nothing comes out it is empty.

I guess I'll have to check the low pressure line considering the compressor doesn't even kick on at this point. The green light turns on when the A/C button is depressed but no compressor.

Where is that valve you speak of located? Easy to get to?

[CTScott]

Originally Posted by winston856

I guess I'll have to check the low pressure line considering the compressor doesn't even kick on at this point. The green light turns on when the A/C button is depressed but no compressor.

Where is that valve you speak of located? Easy to get to?

It's easy to get at. It is located on the car's right side under the hood. Unscrew the grey cover and you'll see the valve:

AC LP Valve.jpg