zage turbo in and running but engine stalls at idle! what could it be?!

[mazilla]

Originally Posted by DKN-YARIS

Yes, i adjusted it everytime with the car off. Here's my question for you if you may have adjusted the screw before...

Did you turn the hex screw counter or clockwise? I did both with no real result in either direction....doing 1/4 to 1/2 turns on the screw each time.

Clockwise to increase idle/open butterfly...mark it and then give it one full turn clockwise and see where that gets you.


I idle @ 950-1000.

[DKN-YARIS]

Originally Posted by mazilla

Clockwise to increase idle/open butterfly...mark it and then give it one full turn clockwise and see where that gets you.


I idle @ 950-1000.

thanks for the info. I will give it a try again as i may even have to reset the ECU again just so i can try and have it relearn the idle again with the new position of the screw.