Car seat is killing me,did anyone install camry seat?

[amitt]

Originally Posted by CTScott

As long as you disconnect the battery before disconnecting the airbag you will be fine from a safety standpoint. The error codes for the SRS ECU can be reset with a simple procedure, if you did log a code while having the seat disconnected. Once the errors are cleared no one would be able to detect that there had been an error in the past. Installing the resistor prevents the error from being logged, so doing so keeps you from even needing to do the reset.

Great, can I reset the code using my bluetooth ELM327 plug and a phone software?, I did that for resetting inverter heat codes on the prius but I don't know if it works for airbag codes as well.

Thanks !

[CTScott]

Originally Posted by amitt

Great, can I reset the code using my bluetooth ELM327 plug and a phone software?, I did that for resetting inverter heat codes on the prius but I don't know if it works for airbag codes as well.

Thanks !

No. But you can do it using this procedure:
http://www.yarisworld.com/forums/sho...d=1#post557473

[amitt]

Originally Posted by CTScott

No. But you can do it using this procedure:
http://www.yarisworld.com/forums/sho...d=1#post557473

That's great Scott, thanks for sharing your knowledge !