Clutch Lines - Toyota Yaris Forums

turboyaris · 04-07-2007, 01:54 PM

the good news is that our clutch line is only about an 8 inch piece and the two connections are just screw-ins for the hard lines. Meaning that if you get the thread right, you should be able to find universal stainless steel lines for pretty cheap.

03Z33 · 04-08-2007, 02:31 AM

I picked up the C-One clutch line when BP had the order going. I'll let you know how it feels once I get it installed, but it probably won't be until I do the R&P, LSD, clutch & FW. The stock clutch pedal sinks to the floor after a few hard laps right now, I haven't blead or replaced the fluid yet, that may take care of it too.

mrbond · 04-27-2011, 11:33 PM

Quote:

Originally Posted by turboyaris

the good news is that our clutch line is only about an 8 inch piece and the two connections are just screw-ins for the hard lines. Meaning that if you get the thread right, you should be able to find universal stainless steel lines for pretty cheap.

That's not a bad idea, and I don't think anyone on this forum has done this yet. Does anyone know what the thread size is?

Btw, I know this thread is a little over 4 years old, but I didn't want to start another one lol

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
07 clutch burning? driver or design?	kennywhy	DIY / Maintenance / Service	22	10-01-2009 02:03 AM
Clutch Start is TOO DEEP	ricepower	DIY / Maintenance / Service	16	03-18-2007 04:02 PM
Friction Point - Clutch	hal9000	DIY / Maintenance / Service	17	12-01-2006 04:55 AM
c one motorsport clutch line(pics)	badhabitz	Performance Modifications	6	07-31-2006 11:08 AM
holy sexy clutch	birdy	General Yaris / Vitz Discussion	8	05-05-2006 09:34 AM

04-07-2007, 01:54 PM	#1
turboyaris Drives: 2007 Yaris Sedan Join Date: Jan 2007 Location: Southern New Jersey Posts: 459	the good news is that our clutch line is only about an 8 inch piece and the two connections are just screw-ins for the hard lines. Meaning that if you get the thread right, you should be able to find universal stainless steel lines for pretty cheap.

04-08-2007, 02:31 AM	#2
03Z33 View User's Garage Drives: TCR10 Join Date: Jun 2006 Location: SoCal Posts: 1,132	I picked up the C-One clutch line when BP had the order going. I'll let you know how it feels once I get it installed, but it probably won't be until I do the R&P, LSD, clutch & FW. The stock clutch pedal sinks to the floor after a few hard laps right now, I haven't blead or replaced the fluid yet, that may take care of it too.