Remote Start DIY Wiring Guide 2006-2010 Yaris

[CTScott]

If I am seeing that correctly, the "bypass" connection really doesn't do anything as wired.

You will need to connect the yellow "starter" wire of the remote starter directly to both the black starter wires on the ignition switch connector and to the black wire on the clutch switch.

[racefear]

Originally Posted by CTScott

If I am seeing that correctly, the "bypass" connection really doesn't do anything as wired.

You will need to connect the yellow "starter" wire of the remote starter directly to both the black starter wires on the ignition switch connector and to the black wire on the clutch switch.

Did you mean purple `starter' wire of the prostart remote starter ?
Seems to be clear for you... I updated post 202(Relay part), can you take a look please, mod the pic, this can help me and futur user...
Some guys use 1N4004 diode betwen 85 - 86 for protection, usefull ?

Tanks for your time

[CTScott]

Originally Posted by racefear

Did you mean purple `starter' wire of the prostart remote starter ?
Seems to be clear for you... I updated post 202(Relay part), can you take a look please, mod the pic, this can help me and futur user...
Some guys use 1N4004 diode betwen 85 - 86 for protection, usefull ?

Tanks for your time

Correct on the purple. The diagram corrections that you made are good now.

The diode won't hurt anything, but in this case where you are only switching power to another relay coil, it really is not necessary.