|
12-07-2013, 09:07 AM | #37 |
Drives: Toyota Yaris 2009; 1.0 3 Cil. Join Date: Oct 2010
Location: The Netherlands
Posts: 495
|
Yes! Post a DIY of it... would help me alot mate!!!! I already found some double sided tape on ebay for exterior use (quite expencive tbh but worth it)
__________________
Speedbumps suck...!
|
12-30-2013, 03:24 AM | #38 |
Drives: 07 yaris 3dr Join Date: Aug 2013
Location: Portland, OR
Posts: 87
|
Before the flares! Look at that fitment! :D
So this is the final product. So best DIY for you guys. Is to get 4 small screws and drill inside the bumper and fender. For the FRONTS. You will need to do some plastic welding on the inside as you can see here. Don't judge me on my plastic welding skills. They look like poop on the inside but who is going to look under there? LOL NOW for the backs You will need to plastic weld a bracket on the middle of the inside of the flare.That is where you will put the double sided tape on. Make sure you secure the SH"T out of it or it'll slowly bounce back and forth. LOL Same thing on the rears to bolt on the inside flares to the bumper. You only need to use 2 one on each side. THEN BAM! |
12-30-2013, 04:35 AM | #39 |
Drives: Toyota Yaris 2009; 1.0 3 Cil. Join Date: Oct 2010
Location: The Netherlands
Posts: 495
|
Sweet! thank you so much... I think I have an idea to put them on too! Just some screws on the inside which is genius, so I dont have holes on the outside! And that plastic welding shouldnt be a problem! Maybe I can find something different if it doesnt work! But ill put a DIY too if I could work it out! Thank you so much man!!! Going to try them on tonight!
__________________
Speedbumps suck...!
|
12-30-2013, 05:13 AM | #40 |
Drives: Toyota Yaris 2009; 1.0 3 Cil. Join Date: Oct 2010
Location: The Netherlands
Posts: 495
|
My fenders are a bit different... hope they work though. I think mine arent from a GTI. we ll see how it works out
__________________
Speedbumps suck...!
|
12-30-2013, 06:59 AM | #41 |
Form>Function
Drives: 07 Flint Sedan Join Date: Dec 2009
Location: Tampa
Posts: 4,018
|
plastic welding, never heard that term before lol
|
12-31-2013, 07:33 AM | #42 |
Drives: Toyota Yaris 2009; 1.0 3 Cil. Join Date: Oct 2010
Location: The Netherlands
Posts: 495
|
Well I have to cut them in pieces... cause mine dont fit that well actually :(
Mine will probably cover only the top of the wheel :) Hopefully that would be a nice sight too... kinda like a rocket bunny thing haha
__________________
Speedbumps suck...!
|
02-08-2014, 08:52 PM | #43 |
Drives: 07 yaris 3dr Join Date: Aug 2013
Location: Portland, OR
Posts: 87
|
On to new wheels! Also picked up a $100 bucket :) |
02-08-2014, 11:12 PM | #44 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
Nice wheel choice! Should look really good. That seat is pretty clean too!
|
02-09-2014, 08:50 PM | #45 |
Form>Function
Drives: 07 Flint Sedan Join Date: Dec 2009
Location: Tampa
Posts: 4,018
|
So you went with the xxrs you were talking about. Looks so good man. Looks like you added some Camber too? What did you use?
|
02-15-2014, 04:09 AM | #46 |
Drives: 07 yaris 3dr Join Date: Aug 2013
Location: Portland, OR
Posts: 87
|
New setup!
This is the final height I am going for. |
02-15-2014, 07:51 AM | #47 |
Form>Function
Drives: 07 Flint Sedan Join Date: Dec 2009
Location: Tampa
Posts: 4,018
|
Damn! you stancey huh???!!!
I like the last two pics height but the first one is meh |
02-16-2014, 05:09 PM | #48 |
Drives: Toyota Yaris 2009; 1.0 3 Cil. Join Date: Oct 2010
Location: The Netherlands
Posts: 495
|
DOPE!!!!!! :D
__________________
Speedbumps suck...!
|
02-20-2014, 02:42 AM | #49 |
Drives: CS1 Join Date: Mar 2013
Location: 661 SoCal
Posts: 107
|
clean red yaris
|
02-27-2014, 03:40 AM | #50 |
Drives: 07 yaris 3dr Join Date: Aug 2013
Location: Portland, OR
Posts: 87
|
Got some good rolling shots today! Oh and I just got a set of rear Scion xa raceland coils for the rear and they seem to ride really nice and stiff. I need to get some front coilovers for the jelly.
|
02-27-2014, 06:55 AM | #51 |
Drives: 2007 Toyota Yaris Hatchback Join Date: Sep 2012
Location: Las Vegas, NV
Posts: 323
|
diggin' it!
|
02-27-2014, 01:22 PM | #52 |
Form>Function
Drives: 07 Flint Sedan Join Date: Dec 2009
Location: Tampa
Posts: 4,018
|
Great shots! You definitely can see a decrease in rear wheel gap. Looks sick man
|
02-27-2014, 03:37 PM | #53 |
toyota
Drives: 2007 Yaris RS Blazed Join Date: Oct 2006
Location: toronto, canada
Posts: 3,637
|
i always wonder if those old gti flares will fit..i guess i got my answer..
__________________
If my calculations are correct, when this baby hits eighty-eight miles per hour... you're gonna see some serious shit!!!!!! "Horsepower is how fast you hit the object. Torque is how far you move that object.." |
02-27-2014, 05:06 PM | #54 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
Siiick.
|
Tags |
stanced |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2012 Audio Upgrade FAQ and Build Log | muffin_top | In Car Entertainment + Electronics (audio / video / alarm) | 19 | 01-19-2022 06:28 PM |
My Build Thread | 1.5 | Photo-Video-Media Gallery | 649 | 11-18-2014 07:00 AM |
Build thread! '08 Yaris Hatch | nimuntak | Photo-Video-Media Gallery | 105 | 01-28-2014 02:28 PM |
The open political discussion thread. Read the first post! | eTiMaGo | Off-topic / Other Cars / Everything else Discussions | 342 | 09-15-2009 12:34 AM |
Aftermarket rim thread vs official wheel guide | regal | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 1 | 04-01-2009 12:11 PM |