My 2011 Vitz

[jimito28]

[jimito28]

my group from west side WEST YARIS CREW MAYAQUEZ P.R.

[yarisugi]

Nice threadjack.

...Need more pic updates Terence! See what happens when you're dormant for one day?!

[trunkout]

Originally Posted by TerenceCruz

Wow that sounds pretty good for a straight pipe from the axle back! I thought a straight pipe from the axle back would sound raspy.

It sounds raspy at 6k on the downshift!


otherwise a nice low roll.

[TerenceCruz]

Originally Posted by 1.5

The key for a deep tone is to through a muffler on the end that will allow the air flow to resonate more in a larger space, especially if youre deleting the resonators

Definitely will add a muffler if I decide to go through with this! Thanks for the help as usual Phil haha.

Originally Posted by yarisugi

Nice threadjack.

...Need more pic updates Terence! See what happens when you're dormant for one day?!

Hahaha as you requested Sugi! Here are some pics I just took today. Filter free, just washed her yesterday. Will definitely be going lower soon. I already removed the locks in the rear, I will try and remove the perches next and see how much lower to the earth I can get even with these fat tires If the rear happens to drop lower than the front, I will just lower the front more I just want to get rid of any raking I may have. Damn, just got an alignment too haha. Might have to throw the camber bolts in the front too. No fenders have been rolled yet either. Really gotta get to that. Guess the front tires are just shaping my fenders for me for now lol. I just trimmed the fender liner but soon I will be taking the whole thing out. The way the car sits right now I get only a little bit of rubbing in the front. On uneven roads, bumps, etc. So hopefully once I try and go lower I can roll the fenders and not have too much rubbing.

[ezhacker1]

So just one question. Do you have passengers in the back ever?

Im so jealous of that driveway... its so flat with no curb. I have to work my way up and contend with parallel parked cars...

[monchito18]

Originally Posted by TerenceCruz

Definitely will add a muffler if I decide to go through with this! Thanks for the help as usual Phil haha.



Hahaha as you requested Sugi! Here are some pics I just took today. Filter free, just washed her yesterday. Will definitely be going lower soon. I already removed the locks in the rear, I will try and remove the perches next and see how much lower to the earth I can get even with these fat tires If the rear happens to drop lower than the front, I will just lower the front more I just want to get rid of any raking I may have. Damn, just got an alignment too haha. Might have to throw the camber bolts in the front too. No fenders have been rolled yet either. Really gotta get to that. Guess the front tires are just shaping my fenders for me for now lol. I just trimmed the fender liner but soon I will be taking the whole thing out. The way the car sits right now I get only a little bit of rubbing in the front. On uneven roads, bumps, etc. So hopefully once I try and go lower I can roll the fenders and not have too much rubbing.

I love it!
Too bad streets here are horrible for coil-overs since they are so stiff :/

[TerenceCruz]

Originally Posted by ezhacker1

So just one question. Do you have passengers in the back ever?

Im so jealous of that driveway... its so flat with no curb. I have to work my way up and contend with parallel parked cars...

Yeah I do actually, I took the car to SF. It was a double date so my cousin and his lady were in the back. It was pretty smooth. This is my friends house, My driveway is a bit steep so I don't really go up it anymore lol.

[TerenceCruz]

Originally Posted by monchito18

I love it!
Too bad streets here are horrible for coil-overs since they are so stiff :/

Aren't you on coils man?

[monchito18]

Originally Posted by TerenceCruz

Aren't you on coils man?

Car height in the banner is photoshop hahahahaha

I'm on 2" lowering springs

[TerenceCruz]

Originally Posted by monchito18

Car height in the banner is photoshop hahahahaha

I'm on 2" lowering springs

Ohh! Haha right on. Still looks great man!

[monchito18]

Originally Posted by TerenceCruz

Ohh! Haha right on. Still looks great man!

Thanks

[1.5]

Looking so good man. Its pretty low already!

Go ahead and remove those reach stands and front liners, dont need any of that lol

[TerenceCruz]

Originally Posted by 1.5

Looking so good man. Its pretty low already!

Go ahead and remove those reach stands and front liners, dont need any of that lol

Thanks Phil! Yeah I plan on doing that tomorrow But, I was also thinking if I should maybe wait for my wheels before I go any lower. Idk. Also, I think maybe when I installed the coils, the ABS and VSC lines might have been stretched.. So maybe that's why they're on all the time. Pain in the ass. I wish I didn't have all of that extra stuff haha.

[TerenceCruz]

Added the 5mm spacer in the rear driver side in an attempt to even out the wheel offset due to our crooked torsion beam.. Still doesn't look even. Not really sure what else I can do haha. Now the driver side looks more flush than the rear passenger side.

[ezhacker1]

Put that spacer to the passenger side? I also have the issue. 10mm hub spacer on one side, a 3mm on the other.

[1.5]

haha it comes with the territory. I say no go low and get used to it so youre not trying to get comfortable with a new slam AND new wheels. I tried removing the last collar i have left in the rear but the threads are marred so it gets stuck almost at the very top.

and please keep posting pics, this thread is becoming an open forum now lol

[TerenceCruz]

Originally Posted by ezhacker1

Put that spacer to the passenger side? I also have the issue. 10mm hub spacer on one side, a 3mm on the other.

Ohh it's the rear passenger side that needs the extra spacer to be even? I could have sworn it was the driver side. But for sure man I'll check it out.