 |
 |
|
|
|
|
05-09-2014, 12:24 AM
|
#1 |
 ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Stock lug nuts work, but I would not want to run them for very long. Mini lugbolts (shown below) are 14mm (versus our 12 mm lugs), so there is quite a bit of slop to the holes, which results in a significant portion of our OEM lugnut taper sitting in the hole.
Mini lug bolt.jpg The lugnuts which I referred to in the link in post #2 above are shown below. They have a much larger tapered section than our stock lugnuts and the "bulge" fills the 14mm to 12mm gap. They were difficult to find since, as mentioned above, most conical bulge lugnuts are not metric. 
__________________
|
|
|
|
08-25-2014, 07:26 PM
|
#2 | |
|
I've made a post!
Drives: Yaris Sedan Join Date: Aug 2014
Location: United States
Posts: 2
|
Quote:
|
|
|
|
|
|
08-25-2014, 07:30 PM
|
#3 |
|
I've made a post!
Drives: Yaris Sedan Join Date: Aug 2014
Location: United States
Posts: 2
|
How long did it take to get these lugn
ut online it is showing me they will not ship until 9-6-14 |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Question about these rims. | Bar_Red_Yaris | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 3 | 06-09-2011 08:54 PM |
| My 17" alloy rims and Kumho tires... will swap for your original wheels! | AutoWashCars | NY / NJ/ CT / PA | 5 | 02-08-2011 07:38 PM |
| RIMS a Noob-toob question =] | donchae | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 45 | 10-17-2010 06:11 PM |
| Question about Rims | MrJester | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 1 | 03-06-2007 10:16 PM |
| hufeisen rims | JustYYaris | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 4 | 01-17-2007 03:16 PM |
Hybrid Mode
