Advice Installing Shocks/Struts and Lowering Springs - Page 2 - Toyota Yaris Forums

Exiwolfman · 07-13-2014, 01:14 PM

Good job :) can u take side shot of car ...as for ur exhaust I would definitely fix that cos over time may damage something ,can u maybe use different length rubber mounts or bend the hangers just a little to get clearance.

Exiwolfman · 07-13-2014, 01:16 PM

Now drive it for a week and then get toe done cos ur wheels will be toed out with drop.

Exiwolfman · 07-13-2014, 01:21 PM

Also add a rear TRD sway bar makes for a huge difference on Yaris ...anyhow good job now go have fun enjoy ur ride.

vaironl · 07-13-2014, 01:23 PM

I have a trd sway bar lol. Here are the pictures of what it's touching should I add a nut net to the rubber hanger?

Sent from my iPhone using Tapatalk

vaironl · 07-13-2014, 02:06 PM

Quote:

Originally Posted by vaironl

I have a trd sway bar lol. Here are the pictures of what it's touching should I add a nut net to the rubber hanger?

Sent from my iPhone using Tapatalk

Doing the zip ties as a temporary fix. I feel as if the vibration will just bend it back I don't even have an idea of how to bend it?

Sent from my iPhone using Tapatalk

Exiwolfman · 07-13-2014, 01:26 PM

I think if u remove it and bend the hanger on the exhaust a bit just by looking at the pic would be the easiest ..muffler shop could heat it up and do it proper unless u can give it a try.

ezhacker1 · 07-14-2014, 05:51 AM

I took both rubber hangers off. After relocating the axle beam, my DC Sport kept rattling against the axle beam metal tab protrusion. This might fix your problem, instead of the hangers i used Hose clamps with a small piece of rubber to keep any rattling from happening.

07-13-2014, 01:23 PM	#4
vaironl Drives: 2010 Yaris 3 door, manual tran Join Date: Jul 2013 Location: -- Posts: 208	Advice Installing Shocks/Struts and Lowering Springs I have a trd sway bar lol. Here are the pictures of what it's touching should I add a nut net to the rubber hanger? Sent from my iPhone using Tapatalk

07-14-2014, 05:51 AM	#7
ezhacker1 Drives: Decepticon - Ravage Join Date: Nov 2008 Location: San Francisco Posts: 1,464	I took both rubber hangers off. After relocating the axle beam, my DC Sport kept rattling against the axle beam metal tab protrusion. This might fix your problem, instead of the hangers i used Hose clamps with a small piece of rubber to keep any rattling from happening. __________________ Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AG Lowering Springs + XA Raceland Rear Springs! So-Cal!!	braytonia	Items for Sale by private party	6	09-21-2014 11:30 AM
what to look out for when installing lowering springs	songa	Performance Modifications	34	09-15-2012 04:29 AM
Which lowering springs with stock shocks/struts	Palmer812	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	2	03-09-2010 12:00 AM
Is it practical to install stiffer shocks without also installing lowering springs?	St_G	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	12	01-18-2007 02:23 PM

07-13-2014, 01:14 PM	#1
Exiwolfman View User's Garage Drives: 2007 Yaris Join Date: Feb 2013 Location: Wasaga beach Posts: 1,617	Good job :) can u take side shot of car ...as for ur exhaust I would definitely fix that cos over time may damage something ,can u maybe use different length rubber mounts or bend the hangers just a little to get clearance.

07-13-2014, 01:16 PM	#2
Exiwolfman View User's Garage Drives: 2007 Yaris Join Date: Feb 2013 Location: Wasaga beach Posts: 1,617	Now drive it for a week and then get toe done cos ur wheels will be toed out with drop.

07-13-2014, 01:21 PM	#3
Exiwolfman View User's Garage Drives: 2007 Yaris Join Date: Feb 2013 Location: Wasaga beach Posts: 1,617	Also add a rear TRD sway bar makes for a huge difference on Yaris ...anyhow good job now go have fun enjoy ur ride.

07-13-2014, 01:26 PM	#6
Exiwolfman View User's Garage Drives: 2007 Yaris Join Date: Feb 2013 Location: Wasaga beach Posts: 1,617	I think if u remove it and bend the hanger on the exhaust a bit just by looking at the pic would be the easiest ..muffler shop could heat it up and do it proper unless u can give it a try.