RATTLING NOISE EXHAUST PIPE/BACK OF ENGINE

[CB900F2]

Hey guys..

Thank you for your feedback, and I changed out the gasket and it was much easier then I was expecting..

No need for heat on the bolts, one pull with my 18" long racket, and they broke lose.

And for my sedan, I needed to unhook the middle hangers as suggested by Wolfman, as if you don't, there isn't enough room to work at getting the gasket off, and re-installing the new one.

And in my situation, I had this issue when I would be braking where at from the 60km to the 50km speed, I would get a rumble with in the car. I was really thinking I had warpped rotors, and it was related to the gasket.. I can only assume the gasket was also leaking and it would somehow cause something to resonate enough to cause this rubble/shake through out the car.

Thanks again guys.

Originally Posted by Exiwolfman

Yup enuf space just have to unhook the exhaust from middle hangers at least one side so u can flex it back .

sent from my S4 on Mars