Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Cosmetic Modifications (Exterior/Interior)
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 10-10-2014, 08:44 AM   #1
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
What exactly are you trying to take apart? If it is to get the mirror glass off, you tilt the mirror up, get your fingers under the bottom, and pull straight out. Once you unclip the bottom, you lift up on the glass to release the top hooks. At that point you have full access to the internals and to the clips that hold the covers on.
__________________
CTScott is offline   Reply With Quote
Old 10-10-2014, 11:03 AM   #2
jcboy
 
Drives: Sedan 07
Join Date: Oct 2012
Location: Asia
Posts: 478
Quote:
Originally Posted by CTScott View Post
What exactly are you trying to take apart? If it is to get the mirror glass off, you tilt the mirror up, get your fingers under the bottom, and pull straight out. Once you unclip the bottom, you lift up on the glass to release the top hooks. At that point you have full access to the internals and to the clips that hold the covers on.
I was able to do that already, thanks to your guide in another post.
I'm trying to take apart the base and the mechanisms (practically take everything apart).

i've removed all screws and T25 Torx (base), but the only thing hindering me from completing the process are the wires for the adjustment. i can't seem to find a way to remove them (without cutting them) and be able to put them back.
jcboy is offline   Reply With Quote
Old 10-10-2014, 11:15 AM   #3
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Quote:
Originally Posted by jcboy View Post
I was able to do that already, thanks to your guide in another post.
I'm trying to take apart the base and the mechanisms (practically take everything apart).

i've removed all screws and T25 Torx (base), but the only thing hindering me from completing the process are the wires for the adjustment. i can't seem to find a way to remove them (without cutting them) and be able to put them back.
Sometimes those kind of mechanisms are built where they are not designed to be taken back apart.
__________________
CTScott is offline   Reply With Quote
Old 10-10-2014, 05:04 PM   #4
ucsmfu
 
Drives: yaris le
Join Date: Sep 2014
Location: vancouver, BC
Posts: 224
Quote:
Originally Posted by CTScott View Post
What exactly are you trying to take apart? If it is to get the mirror glass off, you tilt the mirror up, get your fingers under the bottom, and pull straight out. Once you unclip the bottom, you lift up on the glass to release the top hooks. At that point you have full access to the internals and to the clips that hold the covers on.
same technique to remove the side mirror glass from the 2012 Yaris as well ?

Thanks Scott
ucsmfu is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Remote Start DIY Wiring Guide 2006-2010 Yaris CTScott DIY / Maintenance / Service 272 01-22-2022 11:02 PM
manual vs. automatic osmoq Fuel Economy Forum 82 01-26-2017 01:19 AM
Test drive 2012 Suzuki SX-4 A.W.D.. : 6 speed manual and C.V.T. ( w/ manual shift ) Hershey Off-topic / Other Cars / Everything else Discussions 7 09-30-2011 11:54 AM
Automatic or manual transmission bentjazz Fuel Economy Forum 31 03-03-2011 02:52 AM
Question: Didn't we have the Entire Service Manual in .pdf form? Shroomster Suggestions - Feedback - Questions 2 10-27-2008 01:18 PM


All times are GMT -4. The time now is 02:15 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.