PLEASE HELP! 15x8 wheels

[Nimble]

Originally Posted by contraband831

Ok good info, I am dead set on some 15x8 My car is lowered with Tanabe DF210 Does any one have 15x8 with this set up? and what would be the best offset? I am usually the only person in this car and the set up will be only for those extra special occasions (car shows, meets, etc...) I currently have some 15x6.5 and i see i have a some room to work with, so I am assuming no one has this set up yet, because It all sound like guesses to me (yes i am sure they are VERY educated guessses, none the less) If no definite answers are out there, i guess, I have to go the trial and error route.

You may be "dead set" but it is a far from ideal set up. You will rub no matter what offset. You are going to need to run a lower numerical offset than higher, because rubbing on the outside can somewhat be fixed. If you feel like hacking up your wheel wells though, be my guest. A 15x7 with a 205 tire will be just fine for any use. Why the desperate need for a 8" wide wheel?