HELP!!! - Toyota Yaris Forums

sebastianroher · 02-01-2015, 07:58 PM

I pulled the crankshaft position sensor. I'm going to test it at work tomorrow. I don't know what else it could be, I studied the diagram and the crank sensor is in line with the ignition system and when it fails the car won't start or will be hard to start.

CTScott · 02-01-2015, 08:34 PM

Quote:

Originally Posted by sebastianroher

I pulled the crankshaft position sensor. I'm going to test it at work tomorrow. I don't know what else it could be, I studied the diagram and the crank sensor is in line with the ignition system and when it fails the car won't start or will be hard to start.

0351-0354 can be caused by the Oil control valve not working due to being plugged up. That is the round device mounted next the alternator. It also has a fine mesh filter mounted into the block below it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-01-2015, 07:58 PM	#1
sebastianroher Drives: 2009 Toyota Yaris Hatchback Join Date: Jan 2015 Location: Virginia Beach, Virginia Posts: 46	I pulled the crankshaft position sensor. I'm going to test it at work tomorrow. I don't know what else it could be, I studied the diagram and the crank sensor is in line with the ignition system and when it fails the car won't start or will be hard to start.