Find wire that shows ground when car is armed.

[ezhacker1]

Cool workaround. But looks like the module would arm, even when im locking the doors with the switch. Can something be made to use the lock/unlock wires to show ground/no ground respectively.

Im not sure why the after car alarm's "ground when armed wire" for the starter killer isnt working.

[CTScott]

Originally Posted by ezhacker1

Cool workaround. But looks like the module would arm, even when im locking the doors with the switch. Can something be made to use the lock/unlock wires to show ground/no ground respectively.

Im not sure why the after car alarm's "ground when armed wire" for the starter killer isnt working.

What wire were you told is the GWA wire?

My module does use the lock/unlock wires to make the GWA signal. The problem with those wires is that they are pulsed, not held, so you would just get the signal for a second and then it would go away.