vent fan randomly not working

[CTScott]

Originally Posted by scoobopdan

There's no response or difference between fan speeds. When it's out, it's out.

OK. In that case, check the connector on the back of the control knob and check the connector on the bottom of the fan and the second one next to it for the blower resistor.

[scoobopdan]

Originally Posted by CTScott

OK. In that case, check the connector on the back of the control knob and check the connector on the bottom of the fan and the second one next to it for the blower resistor.

I tried searching a bit but the keywords I"m using are pulling up so many things. Do you know if there's a DIY on here, or do you have a way of doing it? I haven't taken anything off of the dash, so I'm just assuming that you'd have to take off at least a couple of plastic bits before you can get the knob off.

[CTScott]

Originally Posted by scoobopdan

I tried searching a bit but the keywords I"m using are pulling up so many things. Do you know if there's a DIY on here, or do you have a way of doing it? I haven't taken anything off of the dash, so I'm just assuming that you'd have to take off at least a couple of plastic bits before you can get the knob off.

Remove the vertical black pieces by getting your fingers behind them and then simply pull the control panel straight back.