2005 Echo RS Cluster in a 3DR 2004 Echo Liftback .

[lambornisyoantuan]

I'm also doing a cluster swap from a 2000 Vitz, my stock gauge has no rpm(manual transmission). And i bought a vitz gauge with rpm(automatic transmission). Considering that mpcv2000 and I have the same problem, but the year model of our car is different, also the sockets and wire colors. I hope CTScott can address my problem

[CTScott]

Originally Posted by lambornisyoantuan

I'm also doing a cluster swap from a 2000 Vitz, my stock gauge has no rpm(manual transmission). And i bought a vitz gauge with rpm(automatic transmission). Considering that mpcv2000 and I have the same problem, but the year model of our car is different, also the sockets and wire colors. I hope CTScott can address my problem

The Vitz has wiring differences from the USDM Echo. You will need to track down the wiring diagrams for your car and for the one which the cluster came from.

[lambornisyoantuan]

[IMG][/IMG]

22pin ^




18pin ^



stock pin (upper part gauge) ^



stock pin (lower part gauge) ^

actually, its a toyota Echo here in the Philippines.

[lambornisyoantuan]

Originally Posted by CTScott

The Vitz has wiring differences from the USDM Echo. You will need to track down the wiring diagrams for your car and for the one which the cluster came from.

I've successfully changed my cluster. Toyota Echo here in the Philippines was built in Japan, just sayin'

so my problem is i dont know where to tap the "hot" and cold" wires from my RS gauge to the stock wiring harness. I hope you can help me CTScott highly appreciated