Cranky's 2ZR-FE swap

[ArmstrongRacing]

Originally Posted by Jeff Lange

Yeah, the ZSP90 Yaris (factory 2ZR-equipped Yaris) used the same shift cables as the xD, so the xD cables were the proper ones to use. The NCP Yaris cables are shorter for sure.

Jeff

This is not applicable to those just swapping in the 2zr and keeping the Yaris C50. If you use the Yaris trans and mounts, the stock shift cables are fine.

[Jeff Lange]

Originally Posted by ArmstrongRacing

This is not applicable to those just swapping in the 2zr and keeping the Yaris C50. If you use the Yaris trans and mounts, the stock shift cables are fine.

It is applicable if using the 2ZR mounts, even if keeping the Yaris C50. Obviously if you keep using the 1NZ mounts the transmission will still be in the correct location to keep using the original cables.

Jeff