 |
 |
|
|
|
|
05-08-2017, 01:03 PM
|
#1 |
  Drives: 2007 yaris 3 door Join Date: Sep 2015
Location: Denver, Colorado
Posts: 1,000
|
no. i believe you are just changing the position of the turn signal and reverse light. i might be wrong on the wire functions.
the connectors are the same. you only have to replace the connector if you damage it. if you using a simple terminal tool, or even a pick or a safety pin, you can remove the wires without damage to the connector and swap their positions. the connector is the same shape regardless of USDM/JDM/CDM/EDM/AusDM/AisaDM etc. |
|
|
|
05-08-2017, 02:16 PM
|
#2 | |
Drives: 06 5dr LE (deceased), 13 Soul Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,831
|
Quote:
Sent from my Elite_5_5_Octa using Tapatalk
__________________
|
|
|
|
|
|
05-13-2017, 10:30 PM
|
#3 | |
|
Drives: 2007 yaris 3 door Join Date: Sep 2015
Location: Denver, Colorado
Posts: 1,000
|
Quote:
ok. i am wrong. there are different connectors. maybe it is the 09 and up that are all the same. the JDM is square, where as the USDM is a long rectangle, at least for 06-08. i'm sorry for any confusion... |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
