ArmstrongRacing 2018 Season

[ArmstrongRacing]

Originally Posted by tmontague

I can't remember feeling that in the 1nz but at about 4200 rpm on the 2zr there is a very noticeable increase in torque that really kicks in. Very similar in feeling to vtec

If you look at my dyno results https://youtu.be/s85EyjhEmrcyou’ll see the 2zr puts out about 120ftlbs of torque until the 4000rpm mark, then it bumps up to 130!

Then at 5500rpm there’s the crossover and horsepower takes it up to 140 at 6000rpm

[tmontague]

Originally Posted by ArmstrongRacing

If you look at my dyno results https://youtu.be/s85EyjhEmrcyou’ll see the 2zr puts out about 120ftlbs of torque until the 4000rpm mark, then it bumps up to 130!

Then at 5500rpm there’s the crossover and horsepower takes it up to 140 at 6000rpm

missed this post you put. definitely an interesting torque curve on the 2zr and it sure can be felt. I'm hoping to get my car on the dyno over the next couple of months to get a graph to compare to yours.

sorry to hear about the delay on the lsd, that's a pita but will be that much better when it's installed