DIY Cruise Control for 2012 Yaris - Good News! - Toyota Yaris Forums

Per Olof · 07-28-2018, 02:52 AM

Hello I´m new at forum,I want to now if my Toyota Yaris is ok for cruise control
the picture is from under the steering next to yellow socket,the 10 pin socket
and if I can buy a set from you Scot

DarkShadowFox · 08-23-2018, 11:27 AM

Quote:

Originally Posted by Per Olof

Hello I´m new at forum,I want to now if my Toyota Yaris is ok for cruise control
the picture is from under the steering next to yellow socket,the 10 pin socket
and if I can buy a set from you Scot

scot does not sell sets he is not a dealer. you can buy all the parts from the internet. on camelback. he just assembles things.

Per Olof · 09-08-2018, 06:36 AM

thank you for your ansver,I have look at Rostra and conection to ECM is not possible
Its a diffrent ECM behind the glove compartment,But I found a good universal one at
CANM8 England,It works fine in my car from OBD and can bus,the only thing is that it
dont get brake signal to can bus, but they send me extra conection from the brake padel to cruise module,I have test it already and it works fine without extra adjustment,it has a cruise brake butten on the backside of the stulk

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
NEED ENGINE CHECK LIGHT CODE LIST	Attitude	Forced Induction Forum	12	04-11-2011 07:38 PM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 12:59 PM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 05:54 PM

09-08-2018, 06:36 AM	#3
Per Olof View User's Garage Drives: Toyota yaris G 2014 Join Date: Jul 2018 Location: Thailand Posts: 9	thank you for your ansver,I have look at Rostra and conection to ECM is not possible Its a diffrent ECM behind the glove compartment,But I found a good universal one at CANM8 England,It works fine in my car from OBD and can bus,the only thing is that it dont get brake signal to can bus, but they send me extra conection from the brake padel to cruise module,I have test it already and it works fine without extra adjustment,it has a cruise brake butten on the backside of the stulk