2015 Yaris Cruise Control

[hypersata]

Hi All, I am new to the Forum.
I have been reading about how to install cruise control on Yaris 3rd gen- 1.3 L GCC Version with 2nz-FE Engine

the problem is that the gauge cluster does not have a cruise light built in it and even the Clock spiral in the steering was not with the cruise switch port.
so I have installed the new clock spiral which supports steering controls and cruise as well, but now I am wondering what else to do to make the cruise work.

I have installed the cruise switch and plugged in the spiral, the spiral had some additional pins as supplied, and all fo them connected as well.

any help on the same model ??
would be much appreciated.

[mitch9521]

Originally Posted by hypersata

Hi All, I am new to the Forum.
I have been reading about how to install cruise control on Yaris 3rd gen- 1.3 L GCC Version with 2nz-FE Engine

the problem is that the gauge cluster does not have a cruise light built in it and even the Clock spiral in the steering was not with the cruise switch port.
so I have installed the new clock spiral which supports steering controls and cruise as well, but now I am wondering what else to do to make the cruise work.

I have installed the cruise switch and plugged in the spiral, the spiral had some additional pins as supplied, and all fo them connected as well.

any help on the same model ??
would be much appreciated.

As far as I know from experimenting, if you do not have the cruise lights in your instrument cluster, cruise will not work. I found this out by trying out a Japan market cluster in my USDM car and the cruise wouldn't work. Maybe try swapping in a cluster with the cruise lights?

Seems like if no cruise lights, circuit is broken/incomplete and will not work. Very strange.