DIY Cruise Control for 2012 Yaris - Good News! - Toyota Yaris Forums

asura6 · 08-02-2026, 02:50 PM

I successfully installed the cruise control on a 2012 french made 1.3 L 6-speed Yaris. 1NR-FE. This version of the car had a different way of removing the steering pad as it had only one hole for accessing the clips which was located around 6-o'clock. You remove the steering pad by pushing a screwdriver through the hole to disengage the bottom clip and then you can disengage the other clips by pushing the steering pad upwards just using your hands. My steering wheel had audio buttons and and call buttons. There was a vacant 4-pin connector that I simply plugged in the cruise control stalks connector into and it started working.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
NEED ENGINE CHECK LIGHT CODE LIST	Attitude	Forced Induction Forum	12	04-11-2011 06:38 PM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 11:59 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM

08-02-2026, 02:50 PM	#38
asura6 I've made a post! Drives: Yaris NSP130 Join Date: Aug 2026 Location: Sweden Posts: 1	I successfully installed the cruise control on a 2012 french made 1.3 L 6-speed Yaris. 1NR-FE. This version of the car had a different way of removing the steering pad as it had only one hole for accessing the clips which was located around 6-o'clock. You remove the steering pad by pushing a screwdriver through the hole to disengage the bottom clip and then you can disengage the other clips by pushing the steering pad upwards just using your hands. My steering wheel had audio buttons and and call buttons. There was a vacant 4-pin connector that I simply plugged in the cruise control stalks connector into and it started working.