DIY Cruise Control for 2012 Yaris - Good News!

[CTScott]

Originally Posted by meszar

Hi CTScott, I would like to ask whether it is possible to install cruise control Yaris 1.0 2014 purchased in the Czech Republic?

I don't believe that the ECM for the 1.0L supports cruise control.

[meszar]

Originally Posted by CTScott

I don't believe that the ECM for the 1.0L supports cruise control.

It did not please me very much. but it is interesting that Toyota offers 1.0 liters senso packet, which includes cruise control. I do not feel that because of this changing in the production of the control unit.

[CTScott]

Originally Posted by meszar

It did not please me very much. but it is interesting that Toyota offers 1.0 liters senso packet, which includes cruise control. I do not feel that because of this changing in the production of the control unit.

I think something might have gotten lost in translation. What do you mean by "senso packet"?

[apmatzen]

Hmm...I've had 1.0 2012 and I asked the local dealer If they Can install cc in the car...and they can.

But I never got it installed, because I bought another car.

So it can be done, but its very expensive.


Sent from my iPhone using Tapatalk

[meszar]

when I bought Yaris, and the opportunity to take it with Senso Packet, but I could not wait a month, unfortunately.
Senso packet includes:
Dual-zone automatic air conditioning
Rearview mirror with automatic iris
Smart Entry & Start
Twilight sensor
Rain sensor
The air-conditioned glove glove box
Cruise control

[CTScott]

Interesting. So, in that case it sounds like the 1.0 can now do cruise. If you want to be sure, you just need to pull the lower steering column cover and check for 12v on the CCS wire (pin 1 of the spiral cable connector).

[meszar]

Which pin do you mean? :)

[CTScott]

On the black connector on the upper left in the first picture, measure the voltage on the grey and brown pins with the ignition in the ON position (engine not running)

[meszar]

Brown - 0
Grey (right of brown) - 5 - 5,5

[CTScott]

Originally Posted by meszar

Brown - 0
Grey (right of brown) - 5 - 5,5

Interesting. I have not had the opportunity to measure the voltage on the CCS wire of a third generation Yaris, so the 5V, rather than 12V might be OK.

Try jumping the brown to the grey with the Ignition ON, but engine off (you can use a bent paper clip or small piece of wire). If you touch those two terminal together briefly you should be able to toggle the cruise control symbol on and off on the cluster, if it works.

[CTScott]

As far as I am aware, the 1.0L does not have the ECM programming for cruise control.

[texascolt45]

anyone try this on a 2015 1.5 liter L model with an auto trans?i'm curious to know if it will activate the cruise.

[CTScott]

Originally Posted by texascolt45

anyone try this on a 2015 1.5 liter L model with an auto trans?i'm curious to know if it will activate the cruise.

Yes. I have sold quite a few kits to people with 2015s.

[850spdr]

Hi-
I have a 2013 Yaris which has a no start will crank problem. My ECM connector configuration and pinouts are different from those on the TIS documentation.
Is there some way I can get valid connector drawings and signal lists? My ECM is a 89661-52R40.
thanks

[CTScott]

Originally Posted by 850spdr

Hi-

I have a 2013 Yaris which has a no start will crank problem. My ECM connector configuration and pinouts are different from those on the TIS documentation.

Is there some way I can get valid connector drawings and signal lists? My ECM is a 89661-52R40.

thanks

Please post a separate thread instead of hijacking an unrelated one.

[doller]

Hi
which Toyota part number cc stalk do you yaris sorcerers recommend for my 2015 yaris 1,33 vv-t ?
thumbs up from denmark

wow first post

[nikatsgr]

sorry for my poor english.first time in forum.In my Toyota Yaris D4D 2012/07 model STYLE TYPE- NLP130L-CHFSXW, everything is in place,and the clutch switch s in place in the pin 1-2 ihave 5 volts in grey wire and 0 in brown i have put a used oem cc switch and did not work!!i have read that european yaris not support cruise control.is it definately???any solution???thanks any way!!!!!

[marspike]

Originally Posted by nikatsgr

sorry for my poor english.first time in forum.In my Toyota Yaris D4D 2012/07 model STYLE TYPE- NLP130L-CHFSXW, everything is in place,and the clutch switch s in place in the pin 1-2 ihave 5 volts in grey wire and 0 in brown i have put a used oem cc switch and did not work!!i have read that european yaris not support cruise control.is it definately???any solution???thanks any way!!!!!

I have same engine, but mine was product in end 2013 (Business). And mine was delivered with factory CCS whose worked. Two thing, once your CCS was not plug on pin 40 to the ECM. Or second possibility your ECM was not progammed for a cruise control switch.
ECM is a metal box located under the hood in difficult access behind secondary fuse box in right passager side.