SEDAN PROJECTORS - Page 13 - Toyota Yaris Forums

PETERPOOP · 09-05-2009, 11:59 PM

press on!

Brian · 09-06-2009, 12:08 AM

I now see why Camell had to do some cutting. If you want to lower the cut-off the projector
will hit the housing. I measure my cut-off height at about 35 1/2" but my car is also on jack
stands so I will leave it as is and cut later if need be. Everything wire up except halos. Working
on that next. Cut-off is very nice.

PETERPOOP · 09-06-2009, 12:14 AM

beautiful

Brian · 09-06-2009, 12:24 AM

Great news. Halos work perfectly. Wired to turn on when parking light come on. Now back in the
oven to re-seal the headlights.

PETERPOOP · 09-06-2009, 12:58 AM

Quote:

Originally Posted by Brian

Great news. Halos work perfectly. Wired to turn on when parking light come on. Now back in the
oven to re-seal the headlights.

great job. can you be sure to mention how to do this in your write up? Well atleast before I wire mine up when i begin the install tomorrow.

JumpmanYaris · 09-06-2009, 01:04 AM

Quote:

Originally Posted by PETERPOOP

great job. can you be sure to mention how to do this in your write up? Well atleast before I wire mine up when i begin the install tomorrow.

Yeah because I dont know much about it my self

Brian · 09-06-2009, 05:36 AM

Installation complete. DIY will be up in a few hours.

Peterpoop, if you do your install before I post the DIY send me a PM if you need any help.

Kioshi · 09-07-2009, 01:04 AM

Hmm, do you have to paint the housing black or dark grey Brian or Peter?

I just checked the DIY on both of you guys...

LEGATO`` · 09-07-2009, 01:10 AM

nahh i asked them earlier if you read previous posts

you dont have to, but there's just a glare i believe from the stock chrome, but nothing to bad.

PETERPOOP · 09-07-2009, 01:13 AM

Quote:

Originally Posted by LEGATO``

nahh i asked them earlier if you read previous posts

you dont have to, but there's just a glare i believe from the stock chrome, but nothing to bad.

exactly! Atleast camell said there was a glare before he painted his black. So I didn't want to waste time seeing if he was right or not; so I took his word and painted them black.

Kioshi · 09-07-2009, 01:36 AM

sorry dont have time to read previous posts.....at work. Looking out for managers while reading through DIY and ease of install...

I dont mind a bit of glare, if i go this route, I'll keep it chrome or paint some white shade or something...

sam07yaris · 09-07-2009, 01:43 AM

Well well heres an oldie pic but a goodie

My sedan w/ HID retrofit FX bixenon projectors and BLenjar's LB
Took about 8 hrs to do mine

This is if u want to do the actual OEM part retrofit from cars like TSX, TL, s2000, Infinity , e46 etc etc I am going to do another retrofit in the fall with Tsx projectors as fog lamps ^_^

This one is from my 96 civic w/ tsx retrofit.... light spread no glare

Dj_SloKid · 02-25-2010, 10:56 AM

Quote:

Originally Posted by sam07yaris

Well well heres an oldie pic but a goodie

My sedan w/ HID retrofit FX bixenon projectors and BLenjar's LB
Took about 8 hrs to do mine

This is if u want to do the actual OEM part retrofit from cars like TSX, TL, s2000, Infinity , e46 etc etc I am going to do another retrofit in the fall with Tsx projectors as fog lamps ^_^

This one is from my 96 civic w/ tsx retrofit.... light spread no glare

yo what do u charge, them FX projectors r so sexy compared to the kit, and plus I cant stand halo looks extra tacky, man lmk

LEGATO`` · 09-07-2009, 11:39 AM

hmm well with the decision to not black out or not is whats kinda bothering me
i have a pacific blue metallic yaris, wouldnt it look weird if it had the pure black housing?

cali yaris · 09-07-2009, 12:45 PM

It would look fine black, but you can also get color-matched spray paint if you want to do it that way -- which would look awesome.

Kioshi · 09-07-2009, 12:46 PM

can we get it photo shopped for some of us? It would better help people, i think..

camelll - you and Peter have really good contrasting colors to go with black. Black on white = good, black on silver = good.

I'm in the same boat as LEGATO - similar blue color like his~~~

PETERPOOP · 09-07-2009, 01:58 PM

I'm not goot at photoshop at all ( i dont even own it ). However, I can tell already that the black housing will match your car's color very well. It'll change the entire feel though up front. I believe it'll give it a more sporty look.

Trish · 03-31-2009, 12:01 PM

What if I already have HIDs.....?

09-06-2009, 12:08 AM	#2
Brian Drives: '07 Yaris turbo, '11 Juke Join Date: Mar 2007 Location: Riverside, CA Posts: 849	I now see why Camell had to do some cutting. If you want to lower the cut-off the projector will hit the housing. I measure my cut-off height at about 35 1/2" but my car is also on jack stands so I will leave it as is and cut later if need be. Everything wire up except halos. Working on that next. Cut-off is very nice. __________________ http://www.cardomain.com/ride/3875996

09-06-2009, 12:24 AM	#4
Brian Drives: '07 Yaris turbo, '11 Juke Join Date: Mar 2007 Location: Riverside, CA Posts: 849	Great news. Halos work perfectly. Wired to turn on when parking light come on. Now back in the oven to re-seal the headlights. __________________ http://www.cardomain.com/ride/3875996

09-06-2009, 05:36 AM	#7
Brian Drives: '07 Yaris turbo, '11 Juke Join Date: Mar 2007 Location: Riverside, CA Posts: 849	Installation complete. DIY will be up in a few hours. Peterpoop, if you do your install before I post the DIY send me a PM if you need any help. __________________ http://www.cardomain.com/ride/3875996

09-07-2009, 01:10 AM	#9
LEGATO`` Drives: 2007 Yaris S Join Date: Jan 2009 Location: Virginia Beach Posts: 320	nahh i asked them earlier if you read previous posts you dont have to, but there's just a glare i believe from the stock chrome, but nothing to bad. __________________ Project LEGATO

09-07-2009, 01:43 AM	#12
sam07yaris Drives: 07 yaris sedan (silver) STICK Join Date: Aug 2006 Location: Tiverton, RI Posts: 244	Well well heres an oldie pic but a goodie My sedan w/ HID retrofit FX bixenon projectors and BLenjar's LB Took about 8 hrs to do mine This is if u want to do the actual OEM part retrofit from cars like TSX, TL, s2000, Infinity , e46 etc etc I am going to do another retrofit in the fall with Tsx projectors as fog lamps ^_^ This one is from my 96 civic w/ tsx retrofit.... light spread no glare __________________

09-05-2009, 11:59 PM	#1
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	press on!

09-06-2009, 12:14 AM	#3
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	beautiful

09-07-2009, 01:04 AM	#8
Kioshi Heart Up! Vitz Drives: トヨタ Vitz Join Date: Jun 2007 Location: Fremont, CA Posts: 2,582	Hmm, do you have to paint the housing black or dark grey Brian or Peter? I just checked the DIY on both of you guys...

09-07-2009, 01:36 AM	#11
Kioshi Heart Up! Vitz Drives: トヨタ Vitz Join Date: Jun 2007 Location: Fremont, CA Posts: 2,582	sorry dont have time to read previous posts.....at work. Looking out for managers while reading through DIY and ease of install... I dont mind a bit of glare, if i go this route, I'll keep it chrome or paint some white shade or something...

09-07-2009, 11:39 AM	#14
LEGATO`` Drives: 2007 Yaris S Join Date: Jan 2009 Location: Virginia Beach Posts: 320	hmm well with the decision to not black out or not is whats kinda bothering me i have a pacific blue metallic yaris, wouldnt it look weird if it had the pure black housing? __________________ Project LEGATO

09-07-2009, 12:45 PM	#15
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	It would look fine black, but you can also get color-matched spray paint if you want to do it that way -- which would look awesome. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

09-07-2009, 12:46 PM	#16
Kioshi Heart Up! Vitz Drives: トヨタ Vitz Join Date: Jun 2007 Location: Fremont, CA Posts: 2,582	can we get it photo shopped for some of us? It would better help people, i think.. camelll - you and Peter have really good contrasting colors to go with black. Black on white = good, black on silver = good. I'm in the same boat as LEGATO - similar blue color like his~~~

09-07-2009, 01:58 PM	#17
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	I'm not goot at photoshop at all ( i dont even own it ). However, I can tell already that the black housing will match your car's color very well. It'll change the entire feel though up front. I believe it'll give it a more sporty look.

03-31-2009, 12:01 PM	#18
Trish View User's Garage Drives: Yaris Sedan 07 Join Date: Aug 2007 Location: South Shore Posts: 199	What if I already have HIDs.....? __________________ Do it My Way on The High Way

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 05:54 PM
Why people choose a 5dr Liftback instead of a Sedan??	SimmZ	General Yaris / Vitz Discussion	53	05-29-2007 11:28 PM
Toyota Australia releases YRX SEDAN.	Sp33dY	General Yaris / Vitz Discussion	1	08-01-2006 02:19 AM