oem mufdlaps

[mikenacarato]

will do

[Phaeton]

Omg someone in this forum used the word pedantic!
This forum rocks, I thought only my pedant friends were so loquacious.

[mikenacarato]

heres the outcome. the fronts will fit both 08 and 09 and the rears are 09 specific. they ordered a new kit for me and i swapped the rears with them and it went on like a charm!

[IsLNdbOi]

So the '07, '08, and '09 front mudguards are the same, but the '09 rear mudguards are different than the '07 and '08's rear mudguards?

What's the part number for the '09 specific mudguards?

[Chupacabra]

Yes....please advise with the correct p/n for the 2009 rear mud guards! Thanks!

[mikenacarato]

you cannot get the rears seperately, i was just mentioning that the front fit both years but the rears do not. here is the 09 specific set pn# PT769-52090

[Chupacabra]

Originally Posted by mikenacarato

you cannot get the rears seperately, i was just mentioning that the front fit both years but the rears do not. here is the 09 specific set pn# PT769-52090

[mikenacarato]

rear install took me 45 mins, i took each tire off and it makes it a lot easier. the fronts i just jacked the car up and turned the wheel slightly in either direction to get to the holes.

[IsLNdbOi]

Originally Posted by mikenacarato

you cannot get the rears seperately, i was just mentioning that the front fit both years but the rears do not. here is the 09 specific set pn# PT769-52090

Thanks for the part #. Interesting that the only Google result for that part number is this and another thread on YW.

[mikenacarato]

the dealer did not even have that part number set up yet in their computer. he called toyota and they told him to just order the part # and the correct part would arrive haha.

[CTScott]

Originally Posted by mikenacarato

it looks to be. ive looked at mine vs. a buddy here at work with an '08. from what i understand i cannot run jdm tails either :(

The 08 and 09 rear bumpers are different. Back by the tails, the bumper contour is different (the blue one is my 09 and the black one is Sodium's 08). Also, the tails are slightly different in that the 09s taper in where they meet the bottom and the 08's flare out a bit. It looks like 08s or JDMs would fit, but they would stick out over the bumper contour about 1/2" to 3/4".

The 09s have a different connector than the 08s as well. I believe that the 09 connector is a match to the JDM tails, whereby putting JDMs on an 08 required changing the connector.

[mikenacarato]

that is a 100% amazing comparison pic. thanks a ton! last night i more closely compared my friends 08 here at work to mine and we noticed the difference but this daylight pic is awesome. thanks!

[spookz]

I also noticed that the USDM 09's dont have LED tail lamps. The AUDM 09's get LED brake lights, even though they look the same.

[mikenacarato]

i emailed a seller in japan and asked him if he can get me the 2009 jdm tails. he send me a pic back and said we do not have 3 doors here in japan but here are the tails for the 2009 5 door. they were exactly what my yaris came with now. whats the story on that?

[spookz]

the 09 jdm tails are the same appearance-wise to what u have, but the jdm should have a led stop light instead of a globe one.
However, the 09 jdm rs tails are the same as the 07 jdm rs tails.

[mikenacarato]

so i still cant use the rs tails without changing my bumper? but i can use the regular jdm tails?

[spookz]

Yeah, you can't have them sitting flush without the 07 bumper or 07/09 RS bumpers. The normal 09 bumper will not do.
Hope the attached picture helps explain the bumper contour lines.

[mikenacarato]

:(