2010 Yaris Liftback (LB) / Hatchback - Prewired for Trunk Actuator?

[CTScott]

Originally Posted by spookybathtub

Cool. I understand the hatch is already pre-wired, but do you know where that wire leads?

So I just need to buy one cable actuator, and connect it to 12V, and that's it? Seems too easy. Does the key lock still function too?

The key lock would still function. For the hatch You need a rod, not cable actuator, and even with that it is tricky to install it correctly, as the OEM actuator rotates, rather than moving in a linear motion.

For the wiring, the other end comes into the under-dash fuse panel. If you look at my DIY on installing a Scion IQ hatch switch in place of the Yaris lock, it is documented there.

[mbaike]

Hello everyone!

The question is for those who managed to implement this installation.

Can you describe "step by step" what and how you did it?

I have a regular Yaris SCP90 2008 with a a base (no power) mechanical boot lid lock.

I bought an outdoor electric button 69209-52010 from Yaris with keyless entry.
And I also bought a lock with a built-in solenoid 69350-52110 from Yaris with keyless entry.

I would like to open the car as usual using the buttons on the key, but open the boot lid itself by simply pressing the electric button on the boot lid handle.

Is it even possible to implement it?