GROUP BUY - Megan Racing 4-1 Header... - Page 23 - Toyota Yaris Forums

ChinoCharles · 12-08-2006, 03:46 PM

We've had about 20 inches of snow in the past couple of days. I'm guessing that is going to delay my delivery a tad.

I hope I get a black hat. Hehe.

By the by, broke 10,000 miles today. I'm averaging 50 miles a day... and I work 300 yards from my house! I can't stay out of it.

redglare45 · 12-08-2006, 04:47 PM

Yeah, I'm installing mine tomorrow too. = )

ism3t · 12-08-2006, 06:16 PM

just got the call, its done installing. brb with pics and such.

Galavoxx · 12-08-2006, 06:24 PM

What? You had it installed?!! what fun is that? Maybe a stupid question since you now have header that you didn't have to install...

redglare45 · 12-08-2006, 07:32 PM

Woo hoo!!!..... Glad to hear yours is done ism3t. Can't wait to see pics & hear your feedback.

*Chris07LB* · 12-08-2006, 08:19 PM

Just got mine minutes ago....

redglare45 · 12-08-2006, 08:22 PM

Quote:

Originally Posted by Chris07LB

Just got mine minutes ago....

Cool!

.....So you'll install this weekend too Chris?

dngz · 12-08-2006, 09:36 PM

GOT MINE!!!!!

dngz · 12-08-2006, 09:36 PM

CRAP! NO HAT.... BUT A TSHIRT!! omg.. its XL -_-

ChinoCharles · 12-08-2006, 10:39 PM

Mine came in! Look sexy... I'll be on the phone Monday morning to find out when I get them on the dyno.

If you have a black hat and would like to trade for a white one, PM me.

EDIT: After looking at them for a few minutes, let me say that that is the most laughably small header I have ever seen. If this isn't the most endearingly tiny car on Earth I want to see what is. How cute!

ism3t · 12-09-2006, 01:09 AM

ok, pics are impossible to take, sorry team.

however they sent the kit with metric threaded screws, but apparently they dont fit. my guys says you have to find standtard bolts to fit, so right now i got nothing holding the new headers to my cat, my car sounds like a lawnmower. im going back tomrrow so we can find out what size bolt we need. good luck.!

Ran Kizama · 12-09-2006, 08:56 AM

Quote:

Originally Posted by ism3t

however they sent the kit with metric threaded screws, but apparently they dont fit. my guys says you have to find standtard bolts to fit, so right now i got nothing holding the new headers to my cat, my car sounds like a lawnmower. im going back tomrrow so we can find out what size bolt we need. good luck.!

Wait a sec, is it the bolts holding the header to the engine, or to the cat? If it's to the cat, shouldn't you use the factory bolts? Hmm...I'll take a look at mine today when I swap it. Worse case scenario, there's an ACE Hardware 2 mins away.

ItsMyDaily · 12-09-2006, 11:58 AM

Quote:

Originally Posted by ism3t

ok, pics are impossible to take, sorry team.

however they sent the kit with metric threaded screws, but apparently they dont fit. my guys says you have to find standtard bolts to fit, so right now i got nothing holding the new headers to my cat, my car sounds like a lawnmower. im going back tomrrow so we can find out what size bolt we need. good luck.!

You should be able to use the factory bolts again.

*Chris07LB* · 12-09-2006, 07:38 PM

Quote:

Originally Posted by ItsMyDaily

You should be able to use the factory bolts again.

Go to page one.. looks like they reused the original bolts indeed.

Im guessing the studs included with the new header is for the collector, but not pre-installed?? Humm, maybe they had clearence issues when slipping the header in place, with the studs installed before hand?

Man, I should just suck it up tomorrow after work, and get mine on!! This is soo unlike me to have mods sitting.

redglare45 · 12-09-2006, 08:12 PM

Quote:

Originally Posted by Chris07LB

Go to page one.. looks like they reused the original bolts indeed.

Im guessing the studs included with the new header is for the collector, but not pre-installed?? Humm, maybe they had clearence issues when slipping the header in place, with the studs installed before hand?

Man, I should just suck it up tomorrow after work, and get mine on!! This is soo unlike me to have mods sitting.

Chris, I thought you would have a write-up for us already.

I got mine on, used the stock bolts & nuts on the header & collector. Everything seemed to bolt up fine. No issues with it yet. No check engine codes. Took it for a drive and drove it for like 25 miles

and so far so good.

*Chris07LB* · 12-09-2006, 08:50 PM

Got my sick ass outside, and in 15minutes, its almost complete..

Pictures to come shortly....

*Chris07LB* · 12-09-2006, 09:41 PM

Quote:

Originally Posted by redglare45

I got mine on, used the stock bolts & nuts on the header & collector.

DO NOT USE THE ORIGINAL COLLECTOR BOLTS!!!

The original bolt is tapered, and will only thread so far... Use the included 3 studs, to replace the bolts. (1) for bracket (2) for the collector.

riceboy · 12-09-2006, 01:18 AM

Received Members in Red

1. riceboy
2. ism3t
3. Chris07LB
4. eco
5. ChinoCharles
6. dngz
7. Ran Kizama
8. redglare45
9. MD2020
10. punch
11. skc
12. Black Yaris

Sorry bout the lack of tracking numbers I guess those got lost in the mail?!? In any case hope everyone's installs go smoothly. The cats on the Yaris are all located in the midpipe and that's why MR decided not to do the full exhaust. The header as is should be fine.. if anyone else has received their shipment please feel free to update the above list.

12-08-2006, 10:39 PM	#10
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Mine came in! Look sexy... I'll be on the phone Monday morning to find out when I get them on the dyno. If you have a black hat and would like to trade for a white one, PM me. EDIT: After looking at them for a few minutes, let me say that that is the most laughably small header I have ever seen. If this isn't the most endearingly tiny car on Earth I want to see what is. How cute! Last edited by ChinoCharles; 12-08-2006 at 11:31 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GROUP BUY - JDM (RS) Vitz LED Tail Lamp ...	riceboy	Items for Sale by private party	453	07-14-2007 09:30 AM
GROUP BUY...Spiderlite X2,plug n play LED stop lights.	eco	Cosmetic Modifications (Exterior/Interior)	12	10-07-2006 12:05 PM

12-08-2006, 03:46 PM	#1
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	We've had about 20 inches of snow in the past couple of days. I'm guessing that is going to delay my delivery a tad. I hope I get a black hat. Hehe. By the by, broke 10,000 miles today. I'm averaging 50 miles a day... and I work 300 yards from my house! I can't stay out of it.

12-08-2006, 04:47 PM	#2
redglare45 View User's Garage Drives: 07 Sedan - 5 Speed Manual Join Date: May 2006 Location: Pomona / Pasadena, California Posts: 337	Yeah, I'm installing mine tomorrow too. = )

12-08-2006, 06:16 PM	#3
ism3t YarVitz Drives: 07' Yaris Liftback Join Date: Sep 2006 Location: Southern California Posts: 222	just got the call, its done installing. brb with pics and such.

12-08-2006, 06:24 PM	#4
Galavoxx View User's Garage Drives: Yaris Hatch Join Date: Oct 2006 Location: San Francisco Posts: 397	What? You had it installed?!! what fun is that? Maybe a stupid question since you now have header that you didn't have to install...

12-08-2006, 07:32 PM	#5
redglare45 View User's Garage Drives: 07 Sedan - 5 Speed Manual Join Date: May 2006 Location: Pomona / Pasadena, California Posts: 337	Woo hoo!!!..... Glad to hear yours is done ism3t. Can't wait to see pics & hear your feedback.

12-08-2006, 08:19 PM	#6
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Just got mine minutes ago....

12-08-2006, 09:36 PM	#8
dngz View User's Garage Drives: black yaris sedan Join Date: Jun 2006 Location: vancouver Posts: 475	GOT MINE!!!!!

12-09-2006, 01:09 AM	#11
ism3t YarVitz Drives: 07' Yaris Liftback Join Date: Sep 2006 Location: Southern California Posts: 222	ok, pics are impossible to take, sorry team. however they sent the kit with metric threaded screws, but apparently they dont fit. my guys says you have to find standtard bolts to fit, so right now i got nothing holding the new headers to my cat, my car sounds like a lawnmower. im going back tomrrow so we can find out what size bolt we need. good luck.!

12-09-2006, 08:50 PM	#16
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Got my sick ass outside, and in 15minutes, its almost complete.. Pictures to come shortly....

12-09-2006, 01:18 AM	#18
riceboy Drives: icebox Join Date: Apr 2006 Location: CAN Posts: 1,003	Received Members in Red 1. riceboy 2. ism3t 3. Chris07LB 4. eco 5. ChinoCharles 6. dngz 7. Ran Kizama 8. redglare45 9. MD2020 10. punch 11. skc 12. Black Yaris Sorry bout the lack of tracking numbers I guess those got lost in the mail?!? In any case hope everyone's installs go smoothly. The cats on the Yaris are all located in the midpipe and that's why MR decided not to do the full exhaust. The header as is should be fine.. if anyone else has received their shipment please feel free to update the above list.