My 2011 Vitz - Page 23 - Toyota Yaris Forums

TerenceCruz · 06-25-2015, 03:12 PM

Quote:

Originally Posted by coheed

Well, more like welded a few scraps of 2" pipe I had laying around the shop. I like the sound, compared to my Nitto (which is my fav exhaust for the Yaris but it would melt my RR bag), this pipe is louder but deeper. I'll grab a video for you when I get a couple extra minutes.

From where did you weld it though? And sweet thanks man!

Quote:

Originally Posted by ern-diz

Nice.

I got a K&N drop in, but was disappointed to see the built in mesh on the filter box, which I couldn't help but feel must reduce airflow regardless of filter used.

Thanks man! And yes, I sadly saw that right now when I installed this.. But, hopefully these help still! Did you notice an improvement in MPG or throttle response?

coheed · 06-25-2015, 03:22 PM

Quote:

Originally Posted by TerenceCruz

From where did you weld it though? And sweet thanks man!

It starts at the bend right above the axle. I have nothing going on today so I should be able to get a video, and snap some pics so you can see what it looks like.

And on the wheel front, I feel ya. I think mesh looks good, but for a "stance" look I think larger full face wheels look better. I think it's because the Yaris is so tall for a compact car, and cars with more surface area seem to look better with full face wheels.

ern-diz · 06-25-2015, 04:29 PM

Quote:

Originally Posted by TerenceCruz

Thanks man! And yes, I sadly saw that right now when I installed this.. But, hopefully these help still! Did you notice an improvement in MPG or throttle response?

I want to say the throttle response felt better after dropping in the K&N, but I haven't noticed significant change in mpg.

TerenceCruz · 06-25-2015, 04:57 AM

New toy: UPGR8 High Flow drop in air filter. Read some good reviews about it online, and got it for an amazing price :) So, figured I'd give it a shot. Will be installing it tomorrow! I'll let you guys know how it is!

ern-diz · 06-25-2015, 11:50 AM

Quote:

Originally Posted by TerenceCruz

New toy: UPGR8 High Flow drop in air filter. Read some good reviews about it online, and got it for an amazing price :) So, figured I'd give it a shot. Will be installing it tomorrow! I'll let you guys know how it is!

Nice.

I got a K&N drop in, but was disappointed to see the built in mesh on the filter box, which I couldn't help but feel must reduce airflow regardless of filter used.

TerenceCruz · 07-06-2015, 02:37 PM

Put a 5mm spacer in the driver side rear to try and even out the offset in the rear cause of our dumb crooked torsion beam. In this picture it looks like the left side pokes more, but it's probably cause of the angle. In person it looks more even :) I need an exhaust already.. By the way if anyone is going to Wekfest this Sunday, July 12th I will be there! Hit me up :D

Noticed a white Yaris parked next to me at work. I guess here's a stock vs. not picture too lol. I just like this picture, even though this is BEFORE the 5mm spacer. The two girls just happened to walk by when I took it, and no, sadly the car didn't break their necks.. OH WELL. Lol.

yarisugi · 07-07-2015, 01:43 PM

Quote:

Originally Posted by TerenceCruz

The two girls just happened to walk by when I took it, and no, sadly the car didn't break their necks.. OH WELL. Lol.

Give the ladies a ride in your car and they're sure to break necks.
Baby will probably throw up breakfast all over your back seat first.

TerenceCruz · 07-07-2015, 05:12 PM

Quote:

Originally Posted by yarisugi

Give the ladies a ride in your car and they're sure to break necks.
Baby will probably throw up breakfast all over your back seat first.

LMFAO. So true Sugi. I've get to adjust my front dampening too.

ern-diz · 07-06-2015, 06:13 PM

Freestylin · 07-07-2015, 01:40 AM

Lookin' good man.. keep it up!

TerenceCruz · 07-07-2015, 02:35 AM

Quote:

Originally Posted by ern-diz

Quote:

Originally Posted by Freestylin

Lookin' good man.. keep it up!

Thank you guys!

WorkTL · 07-07-2015, 09:09 PM

Where is Wekfest at?

TerenceCruz · 07-07-2015, 09:43 PM

Quote:

Originally Posted by WorkTL

Where is Wekfest at?

It's at Mcnery Convention Center in San Jose! Gona be so much fun lol

Freestylin · 07-08-2015, 01:33 PM

Will your car be in the show?

TerenceCruz · 07-09-2015, 12:30 AM

Quote:

Originally Posted by Freestylin

Will your car be in the show?

No no, definitely not worthy in my opinion

Maybe one day!

Freestylin · 07-09-2015, 01:19 AM

Quote:

Originally Posted by TerenceCruz

No no, definitely not worthy in my opinion

Maybe one day!

Its worth a shot! You don't see many slammed Yaris entering these events for a long time. It will be one of a kind in the show!

TerenceCruz · 07-09-2015, 02:53 AM

Quote:

Originally Posted by Freestylin

Its worth a shot! You don't see many slammed Yaris entering these events for a long time. It will be one of a kind in the show!

Definitely true! I have a nasty gash and a door ding on my driver side sideskirt though

Maybe I'll enter next year if I get the body damaged fixed, get a good exhaust system, and real deal wheels! Hahah. I appreciate it though, thanks for the kind words!

WorkTL · 07-13-2015, 02:42 AM

How much negative camber can you run up front once you installed 2 sets of camber bolts?

07-06-2015, 02:37 PM	#6
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Put a 5mm spacer in the driver side rear to try and even out the offset in the rear cause of our dumb crooked torsion beam. In this picture it looks like the left side pokes more, but it's probably cause of the angle. In person it looks more even :) I need an exhaust already.. By the way if anyone is going to Wekfest this Sunday, July 12th I will be there! Hit me up :D Noticed a white Yaris parked next to me at work. I guess here's a stock vs. not picture too lol. I just like this picture, even though this is BEFORE the 5mm spacer. The two girls just happened to walk by when I took it, and no, sadly the car didn't break their necks.. OH WELL. Lol. Last edited by TerenceCruz; 07-07-2015 at 02:36 AM.

07-07-2015, 01:40 AM	#10
Freestylin Drives: 09 Blizzard Pearl RS LB Join Date: Sep 2009 Location: Calgary, Alberta Posts: 371	Lookin' good man.. keep it up! __________________ “On a given day, a given circumstance, you think you have a limit. And you then go for this limit and you touch this limit, and you think, 'Okay, this is the limit'. And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.” ― Ayrton Senna

07-08-2015, 01:33 PM	#14
Freestylin Drives: 09 Blizzard Pearl RS LB Join Date: Sep 2009 Location: Calgary, Alberta Posts: 371	Will your car be in the show? __________________ “On a given day, a given circumstance, you think you have a limit. And you then go for this limit and you touch this limit, and you think, 'Okay, this is the limit'. And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.” ― Ayrton Senna

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2010 Vitz RS Modellista Completed Car	Vitz Rs Modellista	Photo-Video-Media Gallery	38	11-18-2014 01:25 PM
2012 Vitz from the 2011 Tokyo Auto Salon	CTScott	Third Gen Yaris General Discussion	14	02-10-2011 09:06 AM
Is UA-NCP13 1.5L Manual Trans a Vitz RS?	WesSunday	General Yaris / Vitz Discussion	1	11-28-2010 11:47 AM
Newly refreshed 2011 Toyota Corolla	Kal-El	Off-topic / Other Cars / Everything else Discussions	23	11-27-2010 01:57 PM
A German Yaris/Vitz/Echo ;)	we-to-11	Photo-Video-Media Gallery	5	06-27-2007 09:26 PM

06-25-2015, 04:57 AM	#4
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	New toy: UPGR8 High Flow drop in air filter. Read some good reviews about it online, and got it for an amazing price :) So, figured I'd give it a shot. Will be installing it tomorrow! I'll let you guys know how it is!

07-06-2015, 06:13 PM	#9
ern-diz View User's Garage Drives: 2007 Liftback Join Date: Sep 2007 Location: CA all day Posts: 3,794

07-07-2015, 09:09 PM	#12
WorkTL View User's Garage Drives: 2013 Yaris LE Join Date: Sep 2014 Location: SoCal Posts: 216	Where is Wekfest at?

07-13-2015, 02:42 AM	#18
WorkTL View User's Garage Drives: 2013 Yaris LE Join Date: Sep 2014 Location: SoCal Posts: 216	How much negative camber can you run up front once you installed 2 sets of camber bolts?