Power Enterprise Supercharger Kit - Page 4 - Toyota Yaris Forums

Bluevitz-rs · 01-25-2010, 03:52 PM

Bump, how'd it turn out?

I did a search for "supercharger" and found this thread.

thebarber · 01-25-2010, 04:02 PM

i think frownonfun blew up his engine w/o a tune

WeeYari · 01-25-2010, 04:15 PM

Quote:

Originally Posted by thebarber

i think frownonfun blew up his engine w/o a tune

Really?

KCALB SIRAY · 01-25-2010, 04:19 PM

Damn!! that sucks. Still have mine if he wants it =)

frownonfun · 01-25-2010, 09:46 PM

as far as i know my engine has yet to blow up. being that the piggyback came pre-tuned i'm not sure what tuning i would need otherwise. unless i raised the psi. i think it's at 7 now and that's seems far too little to do any major damage in such a short time.

the kit did not fit however. the bracket in question had to be altered to fit and i don't think this issue is exclusive to the late models. pretty sure it's just a flaw in PE's design or their adaptation of the superchargers design from overseas. idk. tried to call and work with them (as i could probably make some kind of prototype bracket that would fit at my work) but they were, as usual, pretty uninterested in talking.

but it runs good. there is a video up somewhere on here of a few of us hot rodding it up and down this paved strip within an undeveloped housing community. the videos leave quite a bit to be desired because for one i wasn't all that good at driving it then but i've gotten better. but it's like i told someone else... it's really only as fast now as i think it should have been from the factory. but thats just my opinion.

thebarber · 01-25-2010, 09:48 PM

well there ya go! nothing brings the owner out of the woodwork like misinformation!

frownonfun · 01-25-2010, 09:53 PM

yeah i try not to post on this site unless absolutely necessary. for the same reason i try not to go back to my hometown to visit unless absolutely necessary. i'm not a big fan of the drama.

ozmdd · 01-25-2010, 10:59 PM

LOL. The car runs nice with it. He dyno'd around 130, If I recall correctly. The dyno sheet is on here somewhere. We went the same day, and it was obviously stronger and spun-up a lot quicker than my NA car.

His car is what I imagine a TS would be like. Then I cry a little when I realize we'll never get one in the US...

KCALB SIRAY · 01-27-2010, 11:50 AM

VERY disappointing about their lack of interest from the get go. Glad you are liking it.

cali yaris · 01-27-2010, 12:37 PM

Quote:

yeah i don't know why it wouldn't fit an 09 but that's the story i got

Just curious, from whom? If PE said it, it might have to do with the fuel management, not physical fitment.

frownonfun · 01-27-2010, 11:40 PM

Quote:

Originally Posted by cali yaris

Just curious, from whom? If PE said it, it might have to do with the fuel management, not physical fitment.

the service department at my local toyota dealership told me that. actually they didn't necessarily say it doesn't fit the '09. they just told me it wouldn't fit my car. i went on to assume that this must be because i have an 09. because surely power enterprise wouldn't go selling a kit that doesn't fit at all on any us model yaris. lol. silly me for thinking that.

cali yaris · 01-28-2010, 01:17 AM

ok gotcha. does this thread still belong in the "stuff for sale" category? maybe move it to forced induction?

01-25-2010, 04:02 PM	#2
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	i think frownonfun blew up his engine w/o a tune __________________

01-25-2010, 04:19 PM	#4
KCALB SIRAY それを吸ってください View User's Garage Drives: black sand lb Join Date: Oct 2008 Location: Virginia Posts: 8,894	Damn!! that sucks. Still have mine if he wants it =) __________________ http://lifesdailypimpslap.tumblr.com/#me My Build

01-25-2010, 09:46 PM	#5
frownonfun View User's Garage Drives: 09 Yaris HB, 08 SR5 Tundra Join Date: Jan 2009 Location: RGV, Texas Posts: 1,086	as far as i know my engine has yet to blow up. being that the piggyback came pre-tuned i'm not sure what tuning i would need otherwise. unless i raised the psi. i think it's at 7 now and that's seems far too little to do any major damage in such a short time. the kit did not fit however. the bracket in question had to be altered to fit and i don't think this issue is exclusive to the late models. pretty sure it's just a flaw in PE's design or their adaptation of the superchargers design from overseas. idk. tried to call and work with them (as i could probably make some kind of prototype bracket that would fit at my work) but they were, as usual, pretty uninterested in talking. but it runs good. there is a video up somewhere on here of a few of us hot rodding it up and down this paved strip within an undeveloped housing community. the videos leave quite a bit to be desired because for one i wasn't all that good at driving it then but i've gotten better. but it's like i told someone else... it's really only as fast now as i think it should have been from the factory. but thats just my opinion. __________________ I crush you like tiny clown car, because you are clown, yes?

01-25-2010, 09:48 PM	#6
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	well there ya go! nothing brings the owner out of the woodwork like misinformation! __________________

01-25-2010, 09:53 PM	#7
frownonfun View User's Garage Drives: 09 Yaris HB, 08 SR5 Tundra Join Date: Jan 2009 Location: RGV, Texas Posts: 1,086	yeah i try not to post on this site unless absolutely necessary. for the same reason i try not to go back to my hometown to visit unless absolutely necessary. i'm not a big fan of the drama. __________________ I crush you like tiny clown car, because you are clown, yes?

01-25-2010, 03:52 PM	#1
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	Bump, how'd it turn out? I did a search for "supercharger" and found this thread.

01-25-2010, 10:59 PM	#8
ozmdd Reluctantly Crouched... Drives: 2008 Yaris HB M/T Join Date: Oct 2008 Location: DFW, TX Posts: 867	LOL. The car runs nice with it. He dyno'd around 130, If I recall correctly. The dyno sheet is on here somewhere. We went the same day, and it was obviously stronger and spun-up a lot quicker than my NA car. His car is what I imagine a TS would be like. Then I cry a little when I realize we'll never get one in the US...

01-27-2010, 11:50 AM	#9
KCALB SIRAY それを吸ってください View User's Garage Drives: black sand lb Join Date: Oct 2008 Location: Virginia Posts: 8,894	VERY disappointing about their lack of interest from the get go. Glad you are liking it. __________________ http://lifesdailypimpslap.tumblr.com/#me My Build

01-28-2010, 01:17 AM	#12
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	ok gotcha. does this thread still belong in the "stuff for sale" category? maybe move it to forced induction? __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
List of Boosted Yarisworld Members	whooppee777	Forced Induction Forum	262	11-23-2022 06:49 AM
kit to install power locks?	songa	DIY / Maintenance / Service	21	02-12-2015 07:31 AM
Blitz Supercharger and AEM Water Methanol Kit	Morgan	Items for Sale by private party	18	01-25-2010 11:54 PM
Power Enterprise Super Charger Kit Round 2 $3100	Power Enterprise Evan	Forced Induction Forum	312	03-26-2009 07:48 PM
Power Enterprise Supercharger JUST RELEASED!	Power Enterprise Evan	Forced Induction Forum	212	01-29-2009 10:11 AM