Please post pics of your Yaris with aftermarket rims here - Page 48 - Toyota Yaris Forums

mazilla · 08-09-2011, 02:43 PM

Quote:

Originally Posted by Spidermandud

Perfection.

Not quite, but I appreciate the compliment...

There's a Zage turbo kit sitting in my office and I just found out one of my friends used to specialize in fiberglass bodykit work(custom mods, one off bodykits, etc). The plan is turbo,interior, then re-fit/mod the bodykit + paint. Paint will be flat or satin black, all except the CF hood(hard to tell it's CF in the pic).

LEXX · 07-06-2012, 09:30 PM

Quote:

Originally Posted by mazilla

Drag DR23
Diameter

15.0”

Width

6.5”

Bolt Pattern

4-100.0mm

Offset

40mm Weight 13.90 lbs
http://www.dragwheels.com/product.asp?ID=73

Nankang NS2
205/55R15
http://www.nankang.com.tw/home.php?f...t_1&no=7&pno=1

Tanabe
DF210
http://www.tanabe-usa.com/df210.asp

*The body kit was just installed this weekend, it still needs final fit/finish/re-paint(along with the whole car, after the turbo install)

SEXXCCIII!!

and i dont usually like hatchbacks

ilikerice · 08-09-2011, 04:26 PM

mazilla,

love that front bumper and cf hood combo.. I cant wait to get mine also. I am actually thinking about painting my car orange in a couple years though. no time soon.

Id have to say, the last 3 black yaris', all have something I really like. All are soo clean too. Good work guys.. got some really nice ones

ilikerice · 08-18-2011, 05:02 AM

I think you are correct. I will edit my post. I could have sworn these were 15x7.. When I switch back to my rota gt3 this weekend, I'll double check.

eric_edge · 08-25-2011, 10:29 PM

XXR 522 16x7 25mm offset on Primewell PZ900 205/45
Tokico Blues w Tanabe DF210s

EPyarisdriver · 09-04-2011, 02:01 PM

Rota Grids (flat black) 15x6.5 +38
Kumho AST 205/50-15
Dropped 2 inches on Teins
NO RUBBING ISSUES AT ALL!

lkev · 09-10-2011, 02:29 AM

Stance Mindset 16x8 // +26 if not mistaken
195/50/16 - hard to find anything smaller in the islands

Next stop is camber shim and 3/5 mill spacer for the rear. The bitch is evening out where
the plastic of the bumper meets the metal sidewall when rolling but ill figure it out I guess.
Then looower

gabecham · 09-10-2011, 10:41 AM

those look great, nice job . how low is your car at the moment?

2mtech · 09-17-2011, 05:52 PM

Sport Edition A7 15 x 6.5 +38mm offset
Hankook Optima 727 180/60-15

Stock suspension still, but Tanabe NF-210 springs coming soon!

vten · 09-22-2011, 01:00 PM

im possibly getting a new set of rims soon too ...let see ..lol

btw , nice avatar ryan !! Im eyeing the 1198r for the next summer toys

marlondog · 09-30-2011, 11:54 AM

16x7 Spun Supamesh with 205/45/16 Nexxan N3000 tires:

tropicalrs · 09-30-2011, 02:50 PM

mine runs on sparco 17s lowered with Tein.

Killchain · 03-15-2012, 01:29 AM

Quote:

Originally Posted by marlondog

16x7 Spun Supamesh with 205/45/16 Nexxan N3000 tires:

Like the old school look of the Toyota decal, looks like the '80s. Nice, very nice.

seth_man · 03-29-2012, 06:48 PM

949racing 6UL 15x7 +36 Nickel Finish
205/50/15 Hankook Z214 c71 Compound

A-Dingo-Ate-My-Baby · 10-03-2011, 06:30 PM

after 20,000+ miles fretting about 'which exact wheel' and 'which exact tire'

2010
not lowered and won't be
15x7 ET40 Drag DR16 Gunmetal
Michelin Harmony 185/60 R15

Klink10 · 10-04-2011, 10:36 PM

^^^^ yea they do.

marlondog · 10-06-2011, 11:51 PM

Ever since I saw the Rauh Welt Porsches on the web, I knew I had to get back into the mesh wheel game.

Maitas · 10-07-2011, 12:05 PM

Mille Miglia here, 18" by 7,5" (i think) ET45. Car not lowered, and isnt going to be because of practical reasons. Wheels are 225/40 Regals. A bit too big i know, but i just got them and they still have a summer left in them. Probably gonna get some 215/35 after that. The ride is comfortable with more rubber/air though

No rubbing, but the turn radius is widened somewhat.

Car is very dirty, weather sucks at the moment.

I know, 18" isnt the most practical wheelsize, but i got them dirt cheap and im a sucker for big rims

Also got some Alutec Grip 15" for the winter wheels today, will post pics of them when i put them under the car in a month or two

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
Post pics of cylinder head (engine) covers here	joelitton	Cosmetic Modifications (Exterior/Interior)	157	08-02-2017 11:36 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM
My new 09 yaris! (post bath)	tristan	Photo-Video-Media Gallery	10	10-21-2008 01:23 PM

08-09-2011, 04:26 PM	#3
ilikerice Drives: 2010 black yaris Join Date: Oct 2010 Location: savannah, ga Posts: 2,867	mazilla, love that front bumper and cf hood combo.. I cant wait to get mine also. I am actually thinking about painting my car orange in a couple years though. no time soon. Id have to say, the last 3 black yaris', all have something I really like. All are soo clean too. Good work guys.. got some really nice ones

08-18-2011, 05:02 AM	#4
ilikerice Drives: 2010 black yaris Join Date: Oct 2010 Location: savannah, ga Posts: 2,867	I think you are correct. I will edit my post. I could have sworn these were 15x7.. When I switch back to my rota gt3 this weekend, I'll double check.

08-25-2011, 10:29 PM	#5
eric_edge View User's Garage Drives: '11 3dr white Join Date: Jul 2011 Location: SF Bay Area Posts: 65	XXR 522 16x7 25mm offset on Primewell PZ900 205/45 Tokico Blues w Tanabe DF210s

09-04-2011, 02:01 PM	#6
EPyarisdriver ...or Vegas for short Drives: 2010 Toyota Yaris 3door LB Join Date: Jul 2010 Location: El Paso TX Posts: 205	Rota Grids (flat black) 15x6.5 +38 Kumho AST 205/50-15 Dropped 2 inches on Teins NO RUBBING ISSUES AT ALL!

09-10-2011, 02:29 AM	#7
lkev Drives: 07 Yaris Join Date: Jul 2009 Location: Oahu, Hawaii Posts: 31	Stance Mindset 16x8 // +26 if not mistaken 195/50/16 - hard to find anything smaller in the islands Next stop is camber shim and 3/5 mill spacer for the rear. The bitch is evening out where the plastic of the bumper meets the metal sidewall when rolling but ill figure it out I guess. Then looower

09-10-2011, 10:41 AM	#8
gabecham Drives: 09 yaris sedan Join Date: Feb 2011 Location: lutz fl Posts: 26	those look great, nice job . how low is your car at the moment?

09-17-2011, 05:52 PM	#9
2mtech Drives: 2011 Yaris S 3dr Bayou Blue Join Date: Sep 2011 Location: North Carolina Posts: 23	Sport Edition A7 15 x 6.5 +38mm offset Hankook Optima 727 180/60-15 Stock suspension still, but Tanabe NF-210 springs coming soon!

09-22-2011, 01:00 PM	#10
vten Drives: red bare bone yaris hb 3dr Join Date: May 2009 Location: columbus Posts: 1,022	im possibly getting a new set of rims soon too ...let see ..lol btw , nice avatar ryan !! Im eyeing the 1198r for the next summer toys

03-29-2012, 06:48 PM	#14
seth_man View User's Garage Drives: 08 Liftback Join Date: Oct 2008 Location: Thompson, CT Posts: 159	949racing 6UL 15x7 +36 Nickel Finish 205/50/15 Hankook Z214 c71 Compound

10-04-2011, 10:36 PM	#16
Klink10 View User's Garage Drives: 2007 Yaris Liftback Join Date: Sep 2007 Location: 910 Posts: 1,229	^^^^ yea they do.

10-07-2011, 12:05 PM	#18
Maitas Drives: Yaris 5-door LB 07 Join Date: Sep 2011 Location: Finland Posts: 8	Mille Miglia here, 18" by 7,5" (i think) ET45. Car not lowered, and isnt going to be because of practical reasons. Wheels are 225/40 Regals. A bit too big i know, but i just got them and they still have a summer left in them. Probably gonna get some 215/35 after that. The ride is comfortable with more rubber/air though No rubbing, but the turn radius is widened somewhat. Car is very dirty, weather sucks at the moment. I know, 18" isnt the most practical wheelsize, but i got them dirt cheap and im a sucker for big rims Also got some Alutec Grip 15" for the winter wheels today, will post pics of them when i put them under the car in a month or two