TANABE DF210 Spring Install [pics] - Page 7 - Toyota Yaris Forums

*Chris07LB* · 05-06-2007, 02:54 PM

Thats normal after the spring install.

..... not the noise, the top cap space.

BokChoi · 05-06-2007, 04:46 PM

ahhhhh what do you think i should do?

*Chris07LB* · 05-06-2007, 04:58 PM

Well being none of us did the install, or are there to hear the noise, I dont know what to suggest to you.

07typeS · 05-06-2007, 05:09 PM

That high pitched noise, is it a metal on metal sound? do you hear it constantly? do you hear it every 1 wheel rotation? do you hear it when the cars running only, or in gear as well? Some of those answers may help.

BokChoi · 05-06-2007, 05:25 PM

i believe it is only coming from the passenger side. its a very high pitched squeak that happens when the car is moving slow either in drive or reverse. when i get to higher speeds the sound stops. i dont know how to describe the sound. it is very very high pitched and loud sounding almost like a car with bad power steering.

*Chris07LB* · 05-06-2007, 05:39 PM

See if you bent your dust cover while working that side. You may have bent it just enough to be touching the rotor slighty.

Im thinking here... im thinking... hummm...

Your belts are all on the passenger side as well..

BokChoi · 05-06-2007, 05:48 PM

ill have to wait until 2morrow to diagnose the problem, thanks for the info.

BokChoi · 05-07-2007, 07:24 PM

problem fixed!!! the dust guard was rubbing against the rotor just as Chris had predicted!!!
THANK YOU SO MUCH!

brickhardmeat · 05-07-2007, 07:25 PM

Chris is the MAN.

*Chris07LB* · 05-08-2007, 06:10 AM

Glad to help, and glad it was something simple to fix.

07typeS · 05-08-2007, 10:02 AM

glad you got it fixed. I had that same problem on my brothers older accord. It was just so old and the metal got so flimsy that I just took it off. It was a very annoying sound, that I do remember.

Chance · 05-13-2007, 03:56 PM

Thanks, great instructions.
I used Sprint performance springs (claimed 1.75 inch drop) and the car actually rides better than before. I will post pic soon.

Slummy · 05-15-2007, 10:32 AM

DIY was a great help. just a note' i found using a deep offset box end wrench worked very well for the removal of the strut tower bolt.

Thanks, B.

MrJester · 05-15-2007, 10:53 AM

I would agree with that if only I could find a shop that sold them I have checked everywhere around here. Freakin newbie I thought that would be an easy tool to find.

YamilR · 05-17-2007, 08:12 PM

Quote:

Originally Posted by MrJester

I would agree with that if only I could find a shop that sold them I have checked everywhere around here. Freakin newbie I thought that would be an easy tool to find.

Let me recommend a craftsman set, lifetime warranty is a must and you have all the tools that you need. No complaints here

http://www.sears.com/sr/javasr/produ...cemldffidfno.0

*Chris07LB* · 05-17-2007, 09:53 PM

Quote:

Originally Posted by MrJester

I would agree with that if only I could find a shop that sold them I have checked everywhere around here. Freakin newbie I thought that would be an easy tool to find.

Jester - you still need one? Ill send you one.

churp · 05-17-2007, 10:17 PM

I welded a rod onto the side (towards the top) of a cheap socket and it worked fine. Just gotta have a cheap welder!

MrJester · 05-18-2007, 04:59 PM

I mean I could use one but I got my springs installed so I am good.

05-06-2007, 04:46 PM	#110
BokChoi Mada Mada Dane... View User's Garage Drives: Toyota Yaris LB Join Date: Oct 2006 Location: Sophia, WV Posts: 197	ahhhhh what do you think i should do? __________________ My Car My Garage

05-06-2007, 05:09 PM	#112
07typeS View User's Garage Drives: 2007 White Toyota Yaris Type S Join Date: Dec 2006 Location: Southern California Posts: 439	That high pitched noise, is it a metal on metal sound? do you hear it constantly? do you hear it every 1 wheel rotation? do you hear it when the cars running only, or in gear as well? Some of those answers may help. __________________ TRD Springs w/ KYB Struts and Shocks, Custom CAI w/ K&N filter and pre filter wrap, Weapon R Header, Stock 15 inch alloys, Dezod Performance pads, Tanabe Front Strut Bar, 35% front door Tint and 20% Rear doors back Tint, De-Badged Ass, Custom painted flat black interior, Pioneer deh-p6700bt w/ IPOD hookup, Infinity components up front with custom mounted tweeter, Inifinity 6x9's out back, 1 12" kicker comp cvr........

05-06-2007, 05:25 PM	#113
BokChoi Mada Mada Dane... View User's Garage Drives: Toyota Yaris LB Join Date: Oct 2006 Location: Sophia, WV Posts: 197	i believe it is only coming from the passenger side. its a very high pitched squeak that happens when the car is moving slow either in drive or reverse. when i get to higher speeds the sound stops. i dont know how to describe the sound. it is very very high pitched and loud sounding almost like a car with bad power steering. __________________ My Car My Garage

05-06-2007, 05:48 PM	#115
BokChoi Mada Mada Dane... View User's Garage Drives: Toyota Yaris LB Join Date: Oct 2006 Location: Sophia, WV Posts: 197	ill have to wait until 2morrow to diagnose the problem, thanks for the info. __________________ My Car My Garage

05-07-2007, 07:24 PM	#116
BokChoi Mada Mada Dane... View User's Garage Drives: Toyota Yaris LB Join Date: Oct 2006 Location: Sophia, WV Posts: 197	problem fixed!!! the dust guard was rubbing against the rotor just as Chris had predicted!!! THANK YOU SO MUCH! __________________ My Car My Garage

05-06-2007, 02:54 PM	#109
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Thats normal after the spring install. ..... not the noise, the top cap space.

05-06-2007, 04:58 PM	#111
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Well being none of us did the install, or are there to hear the noise, I dont know what to suggest to you.

05-06-2007, 05:39 PM	#114
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	See if you bent your dust cover while working that side. You may have bent it just enough to be touching the rotor slighty. Im thinking here... im thinking... hummm... Your belts are all on the passenger side as well..

05-07-2007, 07:25 PM	#117
brickhardmeat Lonesome Cowboy View User's Garage Drives: 2007 WHITE HATCHBACK Join Date: Feb 2007 Location: Inner City, Dallas Posts: 2,995	Chris is the MAN. __________________ SPONSORED BY

05-08-2007, 06:10 AM	#118
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Glad to help, and glad it was something simple to fix.

05-08-2007, 10:02 AM	#119
07typeS View User's Garage Drives: 2007 White Toyota Yaris Type S Join Date: Dec 2006 Location: Southern California Posts: 439	glad you got it fixed. I had that same problem on my brothers older accord. It was just so old and the metal got so flimsy that I just took it off. It was a very annoying sound, that I do remember. __________________ TRD Springs w/ KYB Struts and Shocks, Custom CAI w/ K&N filter and pre filter wrap, Weapon R Header, Stock 15 inch alloys, Dezod Performance pads, Tanabe Front Strut Bar, 35% front door Tint and 20% Rear doors back Tint, De-Badged Ass, Custom painted flat black interior, Pioneer deh-p6700bt w/ IPOD hookup, Infinity components up front with custom mounted tweeter, Inifinity 6x9's out back, 1 12" kicker comp cvr........

05-13-2007, 03:56 PM	#120
Chance I've made a post! Drives: Black SandPearl Sedan Join Date: May 2007 Location: RI Posts: 1	DIY Thanks, great instructions. I used Sprint performance springs (claimed 1.75 inch drop) and the car actually rides better than before. I will post pic soon.

05-15-2007, 10:32 AM	#121
Slummy View User's Garage Drives: Black LB Join Date: Aug 2006 Location: D.C. Posts: 249	DIY was a great help. just a note' i found using a deep offset box end wrench worked very well for the removal of the strut tower bolt. Thanks, B.

05-15-2007, 10:53 AM	#122
MrJester View User's Garage Drives: homo Join Date: Feb 2007 Location: Homo Posts: 149	I would agree with that if only I could find a shop that sold them I have checked everywhere around here. Freakin newbie I thought that would be an easy tool to find.

05-17-2007, 10:17 PM	#125
churp Clean and (dis)Functional View User's Garage Drives: Yaris 2dr--Black Betty Join Date: Mar 2007 Location: Tropical Minnesota Posts: 562	I welded a rod onto the side (towards the top) of a cheap socket and it worked fine. Just gotta have a cheap welder! __________________ ____________ Old School Cobble Jockey

05-18-2007, 04:59 PM	#126
MrJester View User's Garage Drives: homo Join Date: Feb 2007 Location: Homo Posts: 149	I mean I could use one but I got my springs installed so I am good.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tanabe Strut Tower Bar Install & Review [pics!]	Chris07LB	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	57	04-07-2022 07:46 AM
Springs - Tanabe DF210 or Tein S Tech	andylai2k	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	9	06-10-2007 09:22 PM
Tanabe DF & Strutbar install	mcdaddy	DIY / Maintenance / Service	18	05-03-2007 09:57 PM
TANABE DF210 SPRINGS AVAILABLE!!!	C2AUTOSPL	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	20	08-05-2006 12:28 AM
Spring Install Price	redglare45	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	1	06-30-2006 08:32 PM