|
11-13-2008, 08:32 PM | #1 |
harness bar help
Hey guys, I was looking into building you guys a harness bar for both the sedan and liftback. I need a little help though, as I no longer have a Yaris of my own. I need some pictures of the seat belt bolt areas, both the upper and lower where they attach to car. Also, I need the measurement from the upper seat belt bolts. I need the measurement from pillar to pillar. Also too if you guys could give me an idea of how far back behind the upper seatbelt bolt that your seats go. That way I can design the harness bar with enough room so that you can sit in a comfortable position for you. Thanks for the help guys. Also, If I could find someone in the South Jersey/ philly area so I can mock one of these up, that would be very helpful.
|
|
11-14-2008, 02:27 PM | #2 |
Drives: Jbody Join Date: Oct 2008
Location: Grant, MI
Posts: 44
|
That would be great! Keep everyone updated.
|
11-14-2008, 05:25 PM | #3 |
well... i'm still waiting for someone to give me measurements... I can have these ready by the end of next week, but I need to get these measurements, and then I need to find someone with a yaris in my area, so I can make sure everything bolts up. These would be made out of chromoly and they would be 1 1/2" tubing to allow for the many camcorder mounts to work with the harness bar. I may also eventually make my own camcorder mounts if there is a demand for them.
I also need to know if there is a difference in width of the sedan and liftback, hopefully there is not, so that the product will work universally on both. |
|
11-14-2008, 05:53 PM | #4 |
Drives: 2008 Yaris RS 4-Door LB Join Date: Oct 2008
Location: Richmond, B.C., Canada
Posts: 504
|
Turboyaris, wouldn't it be simplier if you visited a Toyota dealer nearby instead so you can accurately take the necessary measurements?
Just a suggestion, no pun intended.
__________________
Benggolf2 |
11-14-2008, 06:10 PM | #5 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
I'm working on it -- you asked me yesterday!
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
11-14-2008, 06:16 PM | #6 |
haha i tried that, i went to the same one that I bought mine from and they were too busy to bother I suppose, anyways for right now I'm designing the brackets and I need to know the bolt size for the upper and lower seat belt bolts... I couldn't quite figure that out.
|
|
11-14-2008, 06:30 PM | #7 |
Banned
Drives: yw calls me douche and racist. Join Date: Aug 2007
Location: hay
Posts: 2,183
|
Would you really trust anyone else's measurement, other than Garms?
|
11-14-2008, 06:38 PM | #8 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
jkuchta gives good measurements
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
11-14-2008, 08:51 PM | #9 |
Drives: Jbody Join Date: Oct 2008
Location: Grant, MI
Posts: 44
|
Good luck guys!
|
11-14-2008, 11:05 PM | #10 |
Banned
|
I really need a harness bar!!!!! AHHHHHHH!!
__________________
DON'T LIKE ME? TAKE A SEAT WITH THE REST OF THE BITCHES WHO ARE WAITING FOR ME TO GIVE A FUCK. Sponsored by: Micro Image http://microimageonline.com |
11-14-2008, 11:37 PM | #11 |
I'll try and get something together tomorrow night after work for you
|
|
11-15-2008, 12:05 PM | #12 |
thanks man, the big thing I need right now, is the size of the bolts for the seatbelts, that way I can have the flanges made.... the harness bar itself will need to be made with a car in front of me, just in case haha, plus then like everyone said, I will have my own measurements which are all the measurements I need.
|
|
11-15-2008, 12:38 PM | #13 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
K, I will pull a bolt and go match it for you today... M-something, LOL
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
11-15-2008, 06:46 PM | #14 |
I wanna say M10x1.5....I'll pull one tonight.
|
|
11-15-2008, 07:11 PM | #15 |
awesome! i'm 100% interested in getting one for my sedan!
|
|
11-15-2008, 09:55 PM | #16 |
Can't find my bolt gauge, but the head size on all of the seatbelt bolts is 14mm. I think that equates to a M10 size bolt, though I can't say for sure.
|
|
11-16-2008, 10:56 PM | #17 |
I used to have 1700 posts
|
i wouldnt mind one of these
|
11-17-2008, 04:57 PM | #18 |
anyone get a chance to pull out those two seat belt bolts and measure them? apparently yaris owners in jersey are lame... no one wants to help me out with this haha :P
|
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
radio wire colors & alarm wire color reference guide | battleversiontc | In Car Entertainment + Electronics (audio / video / alarm) | 43 | 06-06-2023 02:12 PM |
DIY (08' USDM Liftback): ESUSE Fog Light Install v2.0 | goku87 | DIY / Maintenance / Service | 127 | 02-19-2023 07:01 PM |
Tanabe Front Strut Bar | Benggolf2 | Performance Modifications | 57 | 08-15-2014 02:41 AM |
How exactly does an heavier duty harness work? | IsLNdbOi | Performance Modifications | 5 | 09-26-2006 04:19 AM |
c one motorsport performance bars | badhabitz | Performance Modifications | 17 | 08-23-2006 10:31 PM |