Computer Expert Help - Toyota Yaris Forums

jamal1984 · 11-26-2008, 08:36 PM

after i restore my dell desktop, my cdrom can read only, when i'm try to burn the cd or dvd it's will stop at 11% and eject the disc and said burn failed.
I tried couple different programs, cd brands...all the same. Try to update and still not working
Any idea what's wrong with it?

Thanks

Bob_VT · 11-26-2008, 08:48 PM

More than likely you are running out of resources. How many items are loaded in your start up? I used to have that problem years ago with an older computer. I used to open the system tray and close anything I was not using.

bnther36 · 11-26-2008, 08:51 PM

Have you looked to see if the Device Manager shows a loaded driver? If not, go to the Dell website, they'll have everything you need to ensure that all drivers are loaded.

id3379 · 11-26-2008, 08:55 PM

Mabie your Rom is crappin out,

jamal1984 · 11-26-2008, 09:20 PM

Quote:

Originally Posted by Bob_VT

More than likely you are running out of resources. How many items are loaded in your start up? I used to have that problem years ago with an older computer. I used to open the system tray and close anything I was not using.

thanks yup check that, i'm fine got plenty of performance left

Quote:

Originally Posted by bnther36

Have you looked to see if the Device Manager shows a loaded driver? If not, go to the Dell website, they'll have everything you need to ensure that all drivers are loaded.

What's Loaded Driver? When i'm check my device manager i see CD/DVD Drive - Right Click - Update Driver-Disable-Uninstall-Scan for Hardware change-Properties, tried uninstall reinstall, and still not working.

Quote:

Originally Posted by id3379

Mabie your Rom is crappin out,

Hope not man, this is like laptop cdrom it's really not easy to replace it. wouldn't buy another dell computer, i support to have another 6 months warranty, and they are trying to bs with my warranty now. They said there is something wrong with my warranty, and i need to call back on business hour 8-5 to verifi.

CTScott · 11-26-2008, 11:16 PM

Quote:

Originally Posted by jamal1984

after i restore my dell desktop, my cdrom can read only, when i'm try to burn the cd or dvd it's will stop at 11% and eject the disc and said burn failed.
I tried couple different programs, cd brands...all the same. Try to update and still not working
Any idea what's wrong with it?

Thanks

If the drive is IDE, make sure Ultra DMA is enabled.

Go to control panel, system, device manager.
Locate the IDE ATA/ATAPI controllers and expand.
On each channel, double click, then on the advanced settings tab set transfer mode to "DMA if available" for each device under the channel.

If that doesn't help, it is probably a bad burner. I wear them out in less than a year on my desktop...

Malaya1221 · 11-26-2008, 11:33 PM

loaded driver. i think he's referring to the correct driver of your dvd/cd-rom! if you right click onto the properties, you should be able to see a tab named "driver", click that and then click the "driver details" button.

i think, you have to make sure that you are using the right driver for that specific drive(cd-rom/dvd)...sometimes microsoft will just put a generic driver and the hardware will not function properly!

11-26-2008, 08:36 PM	#1
jamal1984 The Beautification of Car View User's Garage Drives: Toyota Yaris S Join Date: Aug 2006 Location: Georgia, USA Posts: 967	Computer Expert Help after i restore my dell desktop, my cdrom can read only, when i'm try to burn the cd or dvd it's will stop at 11% and eject the disc and said burn failed. I tried couple different programs, cd brands...all the same. Try to update and still not working Any idea what's wrong with it? Thanks

11-26-2008, 08:48 PM	#2
Bob_VT View User's Garage Drives: 08 Yaris LB Join Date: Oct 2008 Location: Vermont Posts: 1,704	More than likely you are running out of resources. How many items are loaded in your start up? I used to have that problem years ago with an older computer. I used to open the system tray and close anything I was not using. __________________ some people are little slinkies. . . . .they are really good for nothing. . . .but they still bring a smile to your face when you push them down a flight of stairs. Come to the DARKSIDE..... We have candy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I Have Become A Geek, My New Computer Set-Up....	The Architect	Off-topic / Other Cars / Everything else Discussions	43	11-22-2008 04:50 PM
Computer	webmaster	In Car Entertainment + Electronics (audio / video / alarm)	54	03-13-2007 07:19 PM

11-26-2008, 08:51 PM	#3
bnther36 Drives: 07 Yaris Sedan Join Date: Apr 2007 Location: Mich Posts: 84	Have you looked to see if the Device Manager shows a loaded driver? If not, go to the Dell website, they'll have everything you need to ensure that all drivers are loaded.

11-26-2008, 08:55 PM	#4
id3379 §†ęĄ¶‡Ћ-NCP96 Join Date: Oct 2008 Posts: 727	Mabie your Rom is crappin out,

11-26-2008, 11:33 PM	#7
Malaya1221 super duper M*******TOR Drives: 2007 jahPANIS egg(Sarao Phil) Join Date: Oct 2008 Location: Torrance, Ca Posts: 1,011	loaded driver. i think he's referring to the correct driver of your dvd/cd-rom! if you right click onto the properties, you should be able to see a tab named "driver", click that and then click the "driver details" button. i think, you have to make sure that you are using the right driver for that specific drive(cd-rom/dvd)...sometimes microsoft will just put a generic driver and the hardware will not function properly!