Megan Coilover install DIY - Toyota Yaris Forums

kapo · 09-23-2007, 03:39 PM

Anyone has a DIY of megan coilovers? I installed mines on saturday with a friend and it was really HARD the front ones... and I think we need to install it again because doesn't look good.

Or someone has the installation manual? I need a favor, someone do a scan of the installation.. I have 3 papers that came with my Megans, but there is no installation instructions.

Thanks!

staticorex · 09-23-2007, 03:47 PM

Not the same brand, but it worked for my Teins too.

http://www.yarisworld.com/forums/sho...ht=diy+springs

kapo · 09-24-2007, 01:42 PM

Thanks! I already checked that post, but I wanted to see how the coilover was done.. I have one doubt, do we need to use the bump stop into the coilover?

kurokoma-kun · 09-24-2007, 02:38 PM

Kapo, you need to talk to Thirty-Nine (if you haven't already). He just completed his install, may be able to fill you in on the fine points.

Thirty-Nine · 09-24-2007, 02:50 PM

Nope -- haven't done the fronts yet. I'll be doing those this evening.

staticorex · 09-24-2007, 08:20 PM

I used the factory bump stop with mine. But I had to cut it. Again, Teins though.

09-23-2007, 03:39 PM	#1
kapo Argentina Presente! View User's Garage Drives: 07 White LB Join Date: May 2007 Location: Pasadena, California Posts: 111	Megan Coilover install DIY Anyone has a DIY of megan coilovers? I installed mines on saturday with a friend and it was really HARD the front ones... and I think we need to install it again because doesn't look good. Or someone has the installation manual? I need a favor, someone do a scan of the installation.. I have 3 papers that came with my Megans, but there is no installation instructions. Thanks!

09-23-2007, 03:47 PM	#2
staticorex View User's Garage Drives: Sc'd Yaris Sedan. Join Date: May 2007 Location: civilwar town. Posts: 660	Not the same brand, but it worked for my Teins too. http://www.yarisworld.com/forums/sho...ht=diy+springs __________________ Tantum religio potuit suadere malorum.

09-24-2007, 02:50 PM	#5
Thirty-Nine Small cars are a big deal View User's Garage Drives: 2007 Yaris Liftback Join Date: Feb 2006 Location: Portland, OR Posts: 3,144	Nope -- haven't done the fronts yet. I'll be doing those this evening. __________________ Subcompact Culture: The Small car blog

09-24-2007, 08:20 PM	#6
staticorex View User's Garage Drives: Sc'd Yaris Sedan. Join Date: May 2007 Location: civilwar town. Posts: 660	I used the factory bump stop with mine. But I had to cut it. Again, Teins though. __________________ Tantum religio potuit suadere malorum.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-24-2007, 01:42 PM	#3
kapo Argentina Presente! View User's Garage Drives: 07 White LB Join Date: May 2007 Location: Pasadena, California Posts: 111	Thanks! I already checked that post, but I wanted to see how the coilover was done.. I have one doubt, do we need to use the bump stop into the coilover?

09-24-2007, 02:38 PM	#4
kurokoma-kun Drives: 2007 Yaris HB Join Date: Apr 2007 Location: my own little world Posts: 1,256	Kapo, you need to talk to Thirty-Nine (if you haven't already). He just completed his install, may be able to fill you in on the fine points.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Sedan Spoiler Install	Kaotic Lazagna	DIY / Maintenance / Service	36	01-20-2020 12:35 AM
Factory armrest install DIY.	PetersRedYaris	DIY / Maintenance / Service	16	07-27-2012 06:25 AM
DIY Sedan Spoiler Install Interest?	Kaotic Lazagna	DIY / Maintenance / Service	28	09-12-2007 12:02 AM
Megan Headers Install	whooppee777	Performance Modifications	6	07-22-2007 12:14 AM
DIY Tacho install question	Capagotks	DIY / Maintenance / Service	6	07-04-2007 05:59 AM