Australian yaris mods!! - Page 2 - Toyota Yaris Forums

lunjiaow · 11-08-2008, 06:40 AM

Ruimond you're car looks like the Fiesta XR4 . Looks good.
What mods have you done?
From the looks of it springs and rims.
Well i just bought a blue two door yaris from Prosser Toyota. Cant wait till i get it.
Plans for it is to put a sound system in it, then 20% grade tint, then rims and springs. I highly doubt i will do any performance mods as yaris' arent fast at all.

saspy · 11-08-2008, 06:42 AM

Quote:

Originally Posted by lunjiaow

Ruimond you're car looks like the Fiesta XR4 . Looks good.
What mods have you done?
From the looks of it springs and rims.
Well i just bought a blue two door yaris from Prosser Toyota. Cant wait till i get it.
Plans for it is to put a sound system in it, then 20% grade tint, then rims and springs. I highly doubt i will do any performance mods as yaris' arent fast at all.

buy my rims

lamdog · 11-08-2008, 06:43 AM

Quote:

Originally Posted by ruimond

Haha cool. I go around there fairly often. Have u done anything to your yaris lamdog?

front top strut bar, rear sway bar, AFE intake, headlight eyelids
de-badged Yaris and Toyota Emblems to be I'LL and Vitz and also put TRD emblem on the back. i also put few TRD stickers on my car, door handles and front windscreen.
thinking to get the yaris lowered and change 17 or 16 inches rims.

lamdog · 11-08-2008, 06:45 AM

i will take some pics of my car when i have my camera back from my friend.

CTScott · 11-08-2008, 01:56 PM

Quote:

Originally Posted by ruimond

Mods: 17inch Wheels ANZ Tazer , Pedders Lowering Springs, NST Short Shifter

Those stripes look awesome. Are they paint or vinyl?

ruimond · 11-08-2008, 09:18 AM

Only done Rims (17's), Springs and NST Short Shifter so far. Was thinking of putting an exhaust but not really sure yet. My car was already tinted when i got it.

Did u installl the intake yourself lamdog? I've seen on most sites they say its for the 1.5L, but mines the YR 1.3L, wonder if they will work in mine.

lamdog · 11-08-2008, 10:13 AM

Quote:

Originally Posted by ruimond

Only done Rims (17's), Springs and NST Short Shifter so far. Was thinking of putting an exhaust but not really sure yet. My car was already tinted when i got it.

Did u installl the intake yourself lamdog? I've seen on most sites they say its for the 1.5L, but mines the YR 1.3L, wonder if they will work in mine.

i took the car to shop to do, bcos i do not have tools at home.
by the way, i have also got short shift kit and underdrive pulley on...
after installing underdrive pulley, the car seems to have more power than installing the intake. it is more noticeable.

i can let u to look at intake if u want :P i am free most of the time after work.
i also got the car tinted, the darkest legal tint, of cos, i wanted to have a darker tint, but i do not want to get pulled over.hahaaa

ruimond · 11-08-2008, 09:50 PM

Quote:

Originally Posted by lamdog

i took the car to shop to do, bcos i do not have tools at home.
by the way, i have also got short shift kit and underdrive pulley on...
after installing underdrive pulley, the car seems to have more power than installing the intake. it is more noticeable.

i can let u to look at intake if u want :P i am free most of the time after work.
i also got the car tinted, the darkest legal tint, of cos, i wanted to have a darker tint, but i do not want to get pulled over.hahaaa

Haha ok we can organise a meet up if you want, interested to see the intake sound and stuff :P I'm free usually monday or thursday or the weekend lol.

CTScott - The stripes are vinyl not painted, it was on the car originally when i bought it from the dealer.

lamdog · 11-09-2008, 12:49 AM

Quote:

Originally Posted by ruimond

Haha ok we can organise a meet up if you want, interested to see the intake sound and stuff :P I'm free usually monday or thursday or the weekend lol.

CTScott - The stripes are vinyl not painted, it was on the car originally when i bought it from the dealer.

no problem. i am free today, if u want... i stay in riverton.

ruimond · 11-09-2008, 01:03 AM

Quote:

Originally Posted by lamdog

no problem. i am free today, if u want... i stay in riverton.

Hehe i was just past that direction on the way to fremantle just then. I don't mind meeting you somewhere if you want, where abouts would be good.

ruimond · 11-09-2008, 01:10 AM

Yeh i live south of the river too, ummm i can come to the Riverton shopping centre if you want. That's the one which has like KFC, Sizzler, Big W and stuff. Meet you there in 15-20mins or so? lol

lamdog · 11-09-2008, 01:14 AM

Quote:

Originally Posted by ruimond

Yeh i live south of the river too, ummm i can come to the Riverton shopping centre if you want. That's the one which has like KFC, Sizzler, Big W and stuff. Meet you there in 15-20mins or so? lol

yeah.... can.. pm me to confirm.. i live very near to the shopping centre there.
meet u at around 2:30?

ruimond · 11-09-2008, 01:16 AM

check pm.

lunjiaow · 11-15-2008, 07:03 AM

Well finally got my YR on Friday.

From then till now. I have installed my sound system. rims and 20grade tint.

Will have to wait till next week for springs. Any suggestions on springs or shall i just go with king springs?

DerKaiZeRs · 11-16-2008, 11:55 AM

Quote:

Originally Posted by lunjiaow

Well finally got my YR on Friday.

From then till now. I have installed my sound system. rims and 20grade tint.

Will have to wait till next week for springs. Any suggestions on springs or shall i just go with king springs?

hi..
where have u install your sound system? and How much it cost?

btw, I bought 7" HU for my yaris.. and apparently it seems not fit with the dash panel. any suggestion what should I do...

saspy · 11-16-2008, 03:33 AM

If you want, i'am selling my lowered springs, its TANABE DF210 very popular spring among the community cant buy it in aus, japanese made

google it.

i bought it from the US and had it sended to here.

WRW76 · 11-17-2008, 02:26 AM

Quote:

Originally Posted by saspy

If you want, i'am selling my lowered springs, its TANABE DF210 very popular spring among the community cant buy it in aus, japanese made

google it.

i bought it from the US and had it sended to here.

How much for your springs? ive just bought(pick up this week) a brand new Yr yaris 3 door in Sting yellow and im just going through the mods list.thinking to get some wheels next

saspy · 11-17-2008, 05:59 AM

Quote:

Originally Posted by WRW76

How much for your springs? ive just bought(pick up this week) a brand new Yr yaris 3 door in Sting yellow and im just going through the mods list.thinking to get some wheels next

get my wheels and my springs, i give u a special deal.

wheel FS thread http://www.yarisworld.com/forums/showthread.php?t=10409

haha

11-08-2008, 09:18 AM	#6
ruimond Drives: Yaris YR Join Date: Oct 2008 Location: Perth, Australia Posts: 515	Only done Rims (17's), Springs and NST Short Shifter so far. Was thinking of putting an exhaust but not really sure yet. My car was already tinted when i got it. Did u installl the intake yourself lamdog? I've seen on most sites they say its for the 1.5L, but mines the YR 1.3L, wonder if they will work in mine. __________________ Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres \| AFE Air Intake System \| NST Short Shifter Kit \| NST Shifter Cable Bushing Kit \| NST 10% Underdrive Crank Pulley \| Pedders Sports Springs \| Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip \| RS Side Skirts \| RS Euro Spoiler \| YRX Front Lip Spoiler \| TRD Style Front Grill \| 12mm Rear Hub Spacers \| Ultra Racing 23mm Rear Sway Bar

11-09-2008, 01:10 AM	#11
ruimond Drives: Yaris YR Join Date: Oct 2008 Location: Perth, Australia Posts: 515	Yeh i live south of the river too, ummm i can come to the Riverton shopping centre if you want. That's the one which has like KFC, Sizzler, Big W and stuff. Meet you there in 15-20mins or so? lol __________________ Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres \| AFE Air Intake System \| NST Short Shifter Kit \| NST Shifter Cable Bushing Kit \| NST 10% Underdrive Crank Pulley \| Pedders Sports Springs \| Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip \| RS Side Skirts \| RS Euro Spoiler \| YRX Front Lip Spoiler \| TRD Style Front Grill \| 12mm Rear Hub Spacers \| Ultra Racing 23mm Rear Sway Bar

11-09-2008, 01:16 AM	#13
ruimond Drives: Yaris YR Join Date: Oct 2008 Location: Perth, Australia Posts: 515	check pm. __________________ Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres \| AFE Air Intake System \| NST Short Shifter Kit \| NST Shifter Cable Bushing Kit \| NST 10% Underdrive Crank Pulley \| Pedders Sports Springs \| Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip \| RS Side Skirts \| RS Euro Spoiler \| YRX Front Lip Spoiler \| TRD Style Front Grill \| 12mm Rear Hub Spacers \| Ultra Racing 23mm Rear Sway Bar

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
News : 2007 Toyota Yaris - the little Euro's official arrival	VitzBoy	General Yaris / Vitz Discussion	9	06-06-2017 01:51 AM
Consumer Reports not too pleased with Yaris	Befuddled	General Yaris / Vitz Discussion	132	02-28-2011 03:57 PM
New Yaris Owner	Kiteless	General Yaris / Vitz Discussion	8	08-03-2006 12:48 AM

11-08-2008, 06:40 AM	#1
lunjiaow Drives: Yaris Join Date: Nov 2008 Location: Perth, Australia. Posts: 189	Ruimond you're car looks like the Fiesta XR4 . Looks good. What mods have you done? From the looks of it springs and rims. Well i just bought a blue two door yaris from Prosser Toyota. Cant wait till i get it. Plans for it is to put a sound system in it, then 20% grade tint, then rims and springs. I highly doubt i will do any performance mods as yaris' arent fast at all.

11-08-2008, 06:45 AM	#4
lamdog View User's Garage Drives: Yaris YRX Join Date: Oct 2008 Location: Perth Australia Posts: 29	i will take some pics of my car when i have my camera back from my friend.

11-15-2008, 07:03 AM	#14
lunjiaow Drives: Yaris Join Date: Nov 2008 Location: Perth, Australia. Posts: 189	Well finally got my YR on Friday. From then till now. I have installed my sound system. rims and 20grade tint. Will have to wait till next week for springs. Any suggestions on springs or shall i just go with king springs?

11-16-2008, 03:33 AM	#16
saspy Drives: Toyota Yaris Join Date: Oct 2008 Location: DownUnder Posts: 74	If you want, i'am selling my lowered springs, its TANABE DF210 very popular spring among the community cant buy it in aus, japanese made google it. i bought it from the US and had it sended to here.