SEDAN PROJECTORS - Page 13 - Toyota Yaris Forums

PETERPOOP · 09-05-2009, 11:59 PM

press on!

Brian · 09-06-2009, 12:08 AM

I now see why Camell had to do some cutting. If you want to lower the cut-off the projector
will hit the housing. I measure my cut-off height at about 35 1/2" but my car is also on jack
stands so I will leave it as is and cut later if need be. Everything wire up except halos. Working
on that next. Cut-off is very nice.

PETERPOOP · 09-06-2009, 12:14 AM

beautiful

Brian · 09-06-2009, 12:24 AM

Great news. Halos work perfectly. Wired to turn on when parking light come on. Now back in the
oven to re-seal the headlights.

PETERPOOP · 09-06-2009, 12:58 AM

Quote:

Originally Posted by Brian

Great news. Halos work perfectly. Wired to turn on when parking light come on. Now back in the
oven to re-seal the headlights.

great job. can you be sure to mention how to do this in your write up? Well atleast before I wire mine up when i begin the install tomorrow.

JumpmanYaris · 09-06-2009, 01:04 AM

Quote:

Originally Posted by PETERPOOP

great job. can you be sure to mention how to do this in your write up? Well atleast before I wire mine up when i begin the install tomorrow.

Yeah because I dont know much about it my self

Brian · 09-06-2009, 05:36 AM

Installation complete. DIY will be up in a few hours.

Peterpoop, if you do your install before I post the DIY send me a PM if you need any help.

Kioshi · 09-07-2009, 01:04 AM

Hmm, do you have to paint the housing black or dark grey Brian or Peter?

I just checked the DIY on both of you guys...

LEGATO`` · 09-07-2009, 01:10 AM

nahh i asked them earlier if you read previous posts

you dont have to, but there's just a glare i believe from the stock chrome, but nothing to bad.

PETERPOOP · 09-07-2009, 01:13 AM

Quote:

Originally Posted by LEGATO``

nahh i asked them earlier if you read previous posts

you dont have to, but there's just a glare i believe from the stock chrome, but nothing to bad.

exactly! Atleast camell said there was a glare before he painted his black. So I didn't want to waste time seeing if he was right or not; so I took his word and painted them black.

Kioshi · 09-07-2009, 01:36 AM

sorry dont have time to read previous posts.....at work. Looking out for managers while reading through DIY and ease of install...

I dont mind a bit of glare, if i go this route, I'll keep it chrome or paint some white shade or something...

sam07yaris · 09-07-2009, 01:43 AM

Well well heres an oldie pic but a goodie

My sedan w/ HID retrofit FX bixenon projectors and BLenjar's LB
Took about 8 hrs to do mine

This is if u want to do the actual OEM part retrofit from cars like TSX, TL, s2000, Infinity , e46 etc etc I am going to do another retrofit in the fall with Tsx projectors as fog lamps ^_^

This one is from my 96 civic w/ tsx retrofit.... light spread no glare

Dj_SloKid · 02-25-2010, 10:56 AM

Quote:

Originally Posted by sam07yaris

Well well heres an oldie pic but a goodie

My sedan w/ HID retrofit FX bixenon projectors and BLenjar's LB
Took about 8 hrs to do mine

This is if u want to do the actual OEM part retrofit from cars like TSX, TL, s2000, Infinity , e46 etc etc I am going to do another retrofit in the fall with Tsx projectors as fog lamps ^_^

This one is from my 96 civic w/ tsx retrofit.... light spread no glare

yo what do u charge, them FX projectors r so sexy compared to the kit, and plus I cant stand halo looks extra tacky, man lmk

LEGATO`` · 09-07-2009, 11:39 AM

hmm well with the decision to not black out or not is whats kinda bothering me
i have a pacific blue metallic yaris, wouldnt it look weird if it had the pure black housing?

cali yaris · 09-07-2009, 12:45 PM

It would look fine black, but you can also get color-matched spray paint if you want to do it that way -- which would look awesome.

Kioshi · 09-07-2009, 12:46 PM

can we get it photo shopped for some of us? It would better help people, i think..

camelll - you and Peter have really good contrasting colors to go with black. Black on white = good, black on silver = good.

I'm in the same boat as LEGATO - similar blue color like his~~~

PETERPOOP · 09-07-2009, 01:58 PM

I'm not goot at photoshop at all ( i dont even own it ). However, I can tell already that the black housing will match your car's color very well. It'll change the entire feel though up front. I believe it'll give it a more sporty look.

Trish · 03-31-2009, 12:01 PM

What if I already have HIDs.....?

09-06-2009, 12:08 AM	#2
Brian Drives: '07 Yaris turbo, '11 Juke Join Date: Mar 2007 Location: Riverside, CA Posts: 849	I now see why Camell had to do some cutting. If you want to lower the cut-off the projector will hit the housing. I measure my cut-off height at about 35 1/2" but my car is also on jack stands so I will leave it as is and cut later if need be. Everything wire up except halos. Working on that next. Cut-off is very nice. __________________ http://www.cardomain.com/ride/3875996

09-06-2009, 12:24 AM	#4
Brian Drives: '07 Yaris turbo, '11 Juke Join Date: Mar 2007 Location: Riverside, CA Posts: 849	Great news. Halos work perfectly. Wired to turn on when parking light come on. Now back in the oven to re-seal the headlights. __________________ http://www.cardomain.com/ride/3875996

09-06-2009, 05:36 AM	#7
Brian Drives: '07 Yaris turbo, '11 Juke Join Date: Mar 2007 Location: Riverside, CA Posts: 849	Installation complete. DIY will be up in a few hours. Peterpoop, if you do your install before I post the DIY send me a PM if you need any help. __________________ http://www.cardomain.com/ride/3875996

09-07-2009, 01:10 AM	#9
LEGATO`` Drives: 2007 Yaris S Join Date: Jan 2009 Location: Virginia Beach Posts: 320	nahh i asked them earlier if you read previous posts you dont have to, but there's just a glare i believe from the stock chrome, but nothing to bad. __________________ Project LEGATO

09-07-2009, 01:43 AM	#12
sam07yaris Drives: 07 yaris sedan (silver) STICK Join Date: Aug 2006 Location: Tiverton, RI Posts: 244	Well well heres an oldie pic but a goodie My sedan w/ HID retrofit FX bixenon projectors and BLenjar's LB Took about 8 hrs to do mine This is if u want to do the actual OEM part retrofit from cars like TSX, TL, s2000, Infinity , e46 etc etc I am going to do another retrofit in the fall with Tsx projectors as fog lamps ^_^ This one is from my 96 civic w/ tsx retrofit.... light spread no glare __________________

09-05-2009, 11:59 PM	#1
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	press on!

09-06-2009, 12:14 AM	#3
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	beautiful

09-07-2009, 01:04 AM	#8
Kioshi Heart Up! Vitz Drives: トヨタ Vitz Join Date: Jun 2007 Location: Fremont, CA Posts: 2,582	Hmm, do you have to paint the housing black or dark grey Brian or Peter? I just checked the DIY on both of you guys...

09-07-2009, 01:36 AM	#11
Kioshi Heart Up! Vitz Drives: トヨタ Vitz Join Date: Jun 2007 Location: Fremont, CA Posts: 2,582	sorry dont have time to read previous posts.....at work. Looking out for managers while reading through DIY and ease of install... I dont mind a bit of glare, if i go this route, I'll keep it chrome or paint some white shade or something...

09-07-2009, 11:39 AM	#14
LEGATO`` Drives: 2007 Yaris S Join Date: Jan 2009 Location: Virginia Beach Posts: 320	hmm well with the decision to not black out or not is whats kinda bothering me i have a pacific blue metallic yaris, wouldnt it look weird if it had the pure black housing? __________________ Project LEGATO

09-07-2009, 12:45 PM	#15
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	It would look fine black, but you can also get color-matched spray paint if you want to do it that way -- which would look awesome. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

09-07-2009, 12:46 PM	#16
Kioshi Heart Up! Vitz Drives: トヨタ Vitz Join Date: Jun 2007 Location: Fremont, CA Posts: 2,582	can we get it photo shopped for some of us? It would better help people, i think.. camelll - you and Peter have really good contrasting colors to go with black. Black on white = good, black on silver = good. I'm in the same boat as LEGATO - similar blue color like his~~~

09-07-2009, 01:58 PM	#17
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	I'm not goot at photoshop at all ( i dont even own it ). However, I can tell already that the black housing will match your car's color very well. It'll change the entire feel though up front. I believe it'll give it a more sporty look.

03-31-2009, 12:01 PM	#18
Trish View User's Garage Drives: Yaris Sedan 07 Join Date: Aug 2007 Location: South Shore Posts: 199	What if I already have HIDs.....? __________________ Do it My Way on The High Way

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 05:54 PM
Why people choose a 5dr Liftback instead of a Sedan??	SimmZ	General Yaris / Vitz Discussion	53	05-29-2007 11:28 PM
Toyota Australia releases YRX SEDAN.	Sp33dY	General Yaris / Vitz Discussion	1	08-01-2006 02:19 AM