removing interior of 2008 hb - Page 2 - Toyota Yaris Forums

sqcomp · 11-30-2009, 12:09 AM

Uness I feel that I have some time...I'll wait until the spring for the drop of the top. I want to drop the liner at the same time I do the a-pillars simply because they almost go hand in hand.

I'll have lots more deadening pictures here in a week. I've gotta get home to strip this girl down again and work her over...errr...yeah.

centrysis · 12-05-2009, 01:39 AM

yay.i finally got started on my fatmat.i only got one little section done,but its a start

centrysis · 12-05-2009, 11:11 PM

got a little more done

sqcomp · 12-06-2009, 10:40 AM

Nice! Now...Foam it.

centrysis · 12-06-2009, 01:11 PM

after 10 hours of putting this stuff in my hands look like they were attacked by rabid ferrets.

centrysis · 12-06-2009, 09:39 PM

everything fatmatted from behind the doors to the hatch.any recomendation on spray adhesive for the foam

sqcomp · 12-07-2009, 07:55 AM

Yes actually...

and one of these...

It makes this...

into this...

It works very well and it allows you to place and resposition as needed. Yes, I also know that I put the stock speaker back in. That changes in a few months when I'm done with my deployment. 8.5" mis basses will replace the stock 6".

Slick · 12-07-2009, 10:50 AM

SQ, WTF is "one of these"? That's the third time ive seen that canister. Is it just a pressure can that let's you spray a liquid at high speeds or what? A link or name or something would be helpful to me lol. Common sense clearly dictates that it's used to apply the glue, aside from that, I'm a nub haha

sqcomp · 12-07-2009, 01:03 PM

It's a compressed air set up glue pot. It allows a mix between compressed air and the glue to be used through a spray gun for quick dispersion on a larger scale than a spray can.

I've used it for carpeting, vinyl, and foam.

Here's a link for you:

http://www.finishsystems.com/solvent...equipment.html

11-30-2009, 12:09 AM	#1
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	Uness I feel that I have some time...I'll wait until the spring for the drop of the top. I want to drop the liner at the same time I do the a-pillars simply because they almost go hand in hand. I'll have lots more deadening pictures here in a week. I've gotta get home to strip this girl down again and work her over...errr...yeah. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

12-06-2009, 10:40 AM	#4
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	Nice! Now...Foam it. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

12-07-2009, 07:55 AM	#7
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	Yes actually... and one of these... It makes this... into this... It works very well and it allows you to place and resposition as needed. Yes, I also know that I put the stock speaker back in. That changes in a few months when I'm done with my deployment. 8.5" mis basses will replace the stock 6". __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

12-07-2009, 10:50 AM	#8
Slick View User's Garage Drives: '09 3-Dr Join Date: Apr 2009 Location: Houston, Texas Posts: 616	SQ, WTF is "one of these"? That's the third time ive seen that canister. Is it just a pressure can that let's you spray a liquid at high speeds or what? A link or name or something would be helpful to me lol. Common sense clearly dictates that it's used to apply the glue, aside from that, I'm a nub haha __________________ In a world... where things squeak, wont fit,start to bleed, or are just plain hard to do.... ArmorAll will fix that

12-07-2009, 01:03 PM	#9
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	It's a compressed air set up glue pot. It allows a mix between compressed air and the glue to be used through a spray gun for quick dispersion on a larger scale than a spray can. I've used it for carpeting, vinyl, and foam. Here's a link for you: http://www.finishsystems.com/solvent...equipment.html __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

12-05-2009, 01:39 AM	#2
centrysis Drives: '08 Yaris LB Join Date: Mar 2009 Location: ohio Posts: 85	yay.i finally got started on my fatmat.i only got one little section done,but its a start

12-05-2009, 11:11 PM	#3
centrysis Drives: '08 Yaris LB Join Date: Mar 2009 Location: ohio Posts: 85	got a little more done

12-06-2009, 01:11 PM	#5
centrysis Drives: '08 Yaris LB Join Date: Mar 2009 Location: ohio Posts: 85	after 10 hours of putting this stuff in my hands look like they were attacked by rabid ferrets.

12-06-2009, 09:39 PM	#6
centrysis Drives: '08 Yaris LB Join Date: Mar 2009 Location: ohio Posts: 85	everything fatmatted from behind the doors to the hatch.any recomendation on spray adhesive for the foam

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2008 Scion tC part-out	MiniTRD	Items for Sale by private party	3	08-27-2009 04:05 AM
Your 2008 Highlight of the year.	MAD DOG	Off-topic / Other Cars / Everything else Discussions	11	12-19-2008 02:41 PM