Stay tuned - Page 18 - Toyota Yaris Forums

Jason@SportsCar · 07-28-2010, 01:03 AM

The head is back on with the new cams installed. A few hours in the AM and it should be ready to run.

rob323 · 07-28-2010, 01:07 AM

Have any dramas with shims?

Jason@SportsCar · 07-28-2010, 01:27 AM

Quote:

Originally Posted by rob323

Have any dramas with shims?

I got it as a complete unit from our engine guy... Just had to pull the cams back out to put in the head bolts.

justjesus · 07-26-2010, 08:48 PM

Jason... show us the aluminum sexyness!!!!!!!

Jason@SportsCar · 08-10-2010, 12:28 AM

Quote:

Originally Posted by justjesus

Jason... show us the aluminum sexyness!!!!!!!

Returned the new wheels. Just going to stick with the 15"s. I wish we could have made it work with the 13"s - the wheels actually worked, it was an issue with the manufacturer that we could not get past.

knowmercy · 08-02-2010, 11:13 PM

Yeah, big cams make idle go to crap usually on a stock ecu. IIRC you're tuned via piggy back right? Might be time to retune with more air being sucked into the engine... but yeah, start with timing, go from there. Also, we need moar pictures!!

Jason@SportsCar · 08-03-2010, 03:35 AM

Quote:

Originally Posted by knowmercy

Yeah, big cams make idle go to crap usually on a stock ecu. IIRC you're tuned via piggy back right? Might be time to retune with more air being sucked into the engine... but yeah, start with timing, go from there. Also, we need moar pictures!!

Currently we are stock with a Camcon, which wont do what we need now. We have a custom stand alone setup being built right now - sort of stand alone, we will still have the stock ECU for a few things.

Just finished all the body work, no time to check the cams yet. But it looks done for our shoot. Headed here in about 12 hours: http://wikimapia.org/16838231/San-Be...rations-Center

Doing a small feature for Toyota Connection magazine.

This will also give me a place to break in the engine and LSD.

Jason@SportsCar · 08-04-2010, 03:47 AM

I am just not sure this new aero package will make the car faster.

The magic... When they are done it will look like the Yaris was going 100mph, instead of 1" a sec.

Got some miles on the engine and trans.

Jason@SportsCar · 08-05-2010, 02:59 PM

Double checked the cam timing and everything is lined up. Our engine guy is convinced the stock ECU just cant deal with it. Fingers crossed that we get our custom harness and new engine management this weekend.

Jason@SportsCar · 08-05-2010, 05:32 PM

It is a great day when the UPS man brings you a package you never ordered.

One of our sales guys mentions the Yaris project to one of his advertisers a few weeks ago, and they built us a set of brake pads to try.

justjesus · 08-06-2010, 04:21 AM

Very nice!!

cali yaris · 08-06-2010, 12:43 PM

Jason, being able to set your idle might help. I have mine at 1100, I'm not sure the stock setting would work for me either.

Quote:

It is a great day when the UPS man brings you a package you never ordered.

Not always; we got a big box of porn once. It wasn't even good porn.

Jason@SportsCar · 08-06-2010, 03:18 PM

Quote:

Originally Posted by cali yaris

Jason, being able to set your idle might help. I have mine at 1100, I'm not sure the stock setting would work for me either.

Not always; we got a big box of porn once. It wasn't even good porn.

soloecho2 · 08-09-2010, 10:30 PM

Did you ever get the fiberglass front fenders ??

Jason@SportsCar · 08-10-2010, 12:24 AM

Quote:

Originally Posted by soloecho2

Did you ever get the fiberglass front fenders ??

No, there did not seem to be enough people interested to make it worth doing. So we just went back to flares on stock fenders.

cali yaris · 08-10-2010, 03:15 AM

"an issue"?

PM me the details, maybe I'll pick them up.

Jason@SportsCar · 08-10-2010, 01:27 PM

Quote:

Originally Posted by cali yaris

"an issue"?

PM me the details, maybe I'll pick them up.

I won't go into detail about why we chose not to use them, or who we got them from at this time. I am certain in your position you see first hand how dealing with the wrong manufacturer can be bad for business.

Any time we do something for use in the magazine we have to decided if we would spend our own money on the product/service/etc, and would we recommend this to someone else... The answer to both of these questions became no.

Personally I hate not using them. The 13" wheel/tire package was going to do so many good things, better gearing, lower CG, less weight. Ultimately I believe not having them will slow us down some at the Runoffs. But it is to late to do anything about it now, and ultimately you have to draw the line somewhere.

Jason@SportsCar · 08-10-2010, 01:32 PM

On a happier note... Last night I pulled out the CamCon and associated wiring, and got the stock harness all patched up. I can now plug in our recently delivered custom plug-n-play harness for our new engine management. Going to get it tuned tomorrow.

We have also scheduled the first installment on the Yaris to go in the Oct issue of SportsCar, which we are working on right now.

07-28-2010, 01:03 AM	#1
Jason@SportsCar Drives: 2015 H Production Yaris Join Date: Oct 2009 Location: Debary, FL Posts: 1,953	The head is back on with the new cams installed. A few hours in the AM and it should be ready to run. __________________ 2005-2008 SCCA Solo BS National Champion 2017-2018 SCCA H Prod National Champion

08-04-2010, 03:47 AM	#8
Jason@SportsCar Drives: 2015 H Production Yaris Join Date: Oct 2009 Location: Debary, FL Posts: 1,953	I am just not sure this new aero package will make the car faster. The magic... When they are done it will look like the Yaris was going 100mph, instead of 1" a sec. Got some miles on the engine and trans. __________________ 2005-2008 SCCA Solo BS National Champion 2017-2018 SCCA H Prod National Champion Last edited by Jason@SportsCar; 08-04-2010 at 07:12 PM.

08-05-2010, 02:59 PM	#9
Jason@SportsCar Drives: 2015 H Production Yaris Join Date: Oct 2009 Location: Debary, FL Posts: 1,953	Double checked the cam timing and everything is lined up. Our engine guy is convinced the stock ECU just cant deal with it. Fingers crossed that we get our custom harness and new engine management this weekend. __________________ 2005-2008 SCCA Solo BS National Champion 2017-2018 SCCA H Prod National Champion

08-05-2010, 05:32 PM	#10
Jason@SportsCar Drives: 2015 H Production Yaris Join Date: Oct 2009 Location: Debary, FL Posts: 1,953	It is a great day when the UPS man brings you a package you never ordered. One of our sales guys mentions the Yaris project to one of his advertisers a few weeks ago, and they built us a set of brake pads to try. __________________ 2005-2008 SCCA Solo BS National Champion 2017-2018 SCCA H Prod National Champion

08-10-2010, 03:15 AM	#16
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	"an issue"? PM me the details, maybe I'll pick them up. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

07-28-2010, 01:07 AM	#2
rob323 Don't drive it, RALLY it! Drives: 1999 echo PRC rally car Join Date: Oct 2008 Location: Joyner, Brisbane Posts: 321	Have any dramas with shims?

07-26-2010, 08:48 PM	#4
justjesus View User's Garage Drives: 2008 Liftback Join Date: Oct 2008 Location: Orange County Posts: 962	Jason... show us the aluminum sexyness!!!!!!!

08-02-2010, 11:13 PM	#6
knowmercy Drives: Blk 3door Join Date: Jan 2009 Location: Ohio Posts: 22	Yeah, big cams make idle go to crap usually on a stock ecu. IIRC you're tuned via piggy back right? Might be time to retune with more air being sucked into the engine... but yeah, start with timing, go from there. Also, we need moar pictures!!

08-06-2010, 04:21 AM	#11
justjesus View User's Garage Drives: 2008 Liftback Join Date: Oct 2008 Location: Orange County Posts: 962	Very nice!!

08-09-2010, 10:30 PM	#14
soloecho2 Drives: 2004 Echo HB Join Date: Oct 2008 Location: Orono, Ontario Posts: 186	Did you ever get the fiberglass front fenders ??

08-10-2010, 01:32 PM	#18
Jason@SportsCar Drives: 2015 H Production Yaris Join Date: Oct 2009 Location: Debary, FL Posts: 1,953	On a happier note... Last night I pulled out the CamCon and associated wiring, and got the stock harness all patched up. I can now plug in our recently delivered custom plug-n-play harness for our new engine management. Going to get it tuned tomorrow. We have also scheduled the first installment on the Yaris to go in the Oct issue of SportsCar, which we are working on right now. __________________ 2005-2008 SCCA Solo BS National Champion 2017-2018 SCCA H Prod National Champion

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hood Stay (lift) Instal	1NZYaris1	DIY / Maintenance / Service	31	09-22-2016 08:56 PM
The opposite sex can't stay away with ssk	POORSHA	DIY / Maintenance / Service	20	08-19-2009 11:41 AM
eTiMaGo Stay safe	Bob_VT	Off-topic / Other Cars / Everything else Discussions	20	12-02-2008 06:31 PM
Tuned a DBW Toyota yesterday	Turbo&Auto	Performance Modifications	17	08-17-2007 01:04 AM
why am I always here?! wtf...i cant stay away..	Blenjar	Off-topic / Other Cars / Everything else Discussions	5	02-26-2007 11:51 AM