|
|
02-14-2013, 07:59 AM | #1 |
C'est la vie
Drives: 2009 2 door hatchback Join Date: Aug 2009
Location: chicago
Posts: 482
|
20 psi and my couplers are holding. Are U running a FIC or a standalone? My FIC is maxed out at 20. 15psi atmosphere plus 20psi boost runs to the top of the FIC map at 35.
|
02-14-2013, 09:47 AM | #2 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
Running the fic still but if I am able to save a few here and there I will be upgrading to standalone. Garm did you have to modify anything to get your turbo to fit back there? Think I still have your manifold in my garage.
|
02-14-2013, 12:23 PM | #3 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
^ I remember having to clock it, and I insulated the firewall, but otherwise it fits okay.
Remember, we now offer plug 'n play AEM EMS + Boomslang harness. Best of all worlds, and certainly the way I would have done it.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
02-14-2013, 05:24 PM | #4 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
Ok cool I may take you up on that offer. My FIC is wired in gonna be a pain to remove .
|
02-14-2013, 09:55 PM | #5 |
Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010
Location: New Jersey
Posts: 875
|
^ Just throw the bypass plug in and be done with it.
|
02-15-2013, 01:59 PM | #6 |
C'est la vie
Drives: 2009 2 door hatchback Join Date: Aug 2009
Location: chicago
Posts: 482
|
What's the price on that Aem Ems boomslang combo Garm? We need a YW discount.
Last edited by pimp my yaris; 02-15-2013 at 11:28 PM. |
02-15-2013, 03:45 PM | #7 | |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Quote:
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
|
02-18-2013, 05:45 PM | #8 | |
Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010
Location: New Jersey
Posts: 875
|
Quote:
The thought of having to remove that harness after it's installed is worth no worldly sum of money to me for the effort involved, lol. |
|
02-18-2013, 06:23 PM | #9 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
|
02-20-2013, 01:02 PM | #10 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
Question did anyone need to change to tolerances when installing the pistons? I think it says 35 thousandths but not sure if it should be more for my boost level
|
02-20-2013, 01:09 PM | #11 |
1NZ-6spd
Drives: '05 6-Spd Vitz RS Join Date: Oct 2008
Location: Oshawa, Ontario, Canada
Posts: 2,967
|
Piston to wall clearance?
|
02-20-2013, 07:02 PM | #12 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
|
02-20-2013, 07:04 PM | #13 |
1NZ-6spd
Drives: '05 6-Spd Vitz RS Join Date: Oct 2008
Location: Oshawa, Ontario, Canada
Posts: 2,967
|
It's different if you're using forged or cast pistons. Each has a different expansion rate so you'll have to do a bit more research to get it correct.
|
02-24-2013, 09:05 PM | #14 |
C'est la vie
Drives: 2009 2 door hatchback Join Date: Aug 2009
Location: chicago
Posts: 482
|
I went with the standard piston size. I beleve it was 75mm. I did not have a proper cyl. Bore guage. I have a little to much clearance. Noisy piston slap when the motor is cold. It gets a lot more quite when the motor is warm. It sounds like a old VW diesel. I have beaten the shit out of it with no problems yet. No oil burning at all. Its just sounds shitty when cold. Both Garm and blown xa said they have some piston slap noise. I beleve you can have some tighter tolerance on forged pistons as opposed to cast because they dont expand as much. This would explain my noise. I dont know what sizes you can by for custom cp pistons. I know 75 and 75.5 mm are available. Best to measure with a bore guage. And remember pistons are not perfectly round.
|
02-24-2013, 09:53 PM | #15 |
1NZ-6spd
Drives: '05 6-Spd Vitz RS Join Date: Oct 2008
Location: Oshawa, Ontario, Canada
Posts: 2,967
|
Pistons should be perfectly round. A worn cylinder bore might not be though.
|
02-24-2013, 10:58 PM | #16 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
I think we have 76mm also.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
02-25-2013, 01:02 PM | #17 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
I have the 75.5 mm one. Might be getting a custom manifold made for the turbo. Cant fit it in there with the waste gate I was looking the the PT tuning one but not sure if it would fit back there.
|
02-25-2013, 01:13 PM | #18 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Why doesn't it fit? I have the same manifold I sell and mine fits back there.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Turbo Project Yaris TS 1.8L | CASTREX | Yaris TS Talk | 40 | 08-21-2009 10:24 AM |
HKS turbo timer type 1 | Tamago | Performance Modifications | 3 | 07-21-2009 11:59 AM |
Turbo Kit - trade for stock parts! | crankyelbow | Items for Sale by private party | 62 | 02-03-2009 12:30 PM |
delayed turbo project... | joey1320 | Forced Induction Forum | 8 | 09-26-2007 11:18 PM |
Vitz Rs turbo vs U.S. Yaris add turbo? | weaponrcamry | Performance Modifications | 18 | 08-09-2006 08:45 PM |