|
11-18-2009, 06:10 PM | #55 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
C27 is the 9 pin connector on the front of the transmission (by the shift linkage). It has a row of 4 and a row of 5 pins. The center wire (light blue) on the 5 pin row is the "Drive" indicator wire. It will have 12V on it when the shift is in drive. For ground, you can grab a chassis ground, like the ground bolt under the left headlight. |
|
11-24-2009, 01:04 AM | #56 | |
Drives: Yaris RUSH HatchBack Join Date: Jan 2009
Location: Perth, WA
Posts: 80
|
Quote:
Hihi, I already tested the wires tat u mentioned in the picture.. The blue wire does give constant 12v and the pink wire should turn on the lights with the door right? I already tested the pink wire by multimeter and it will only give 12v when the door is closed. So may I know what can I do in order to get 12v out when the door is open because I want my led to be on only when the door is open... Thanks... Last edited by charleschia1986; 11-24-2009 at 01:53 AM. |
|
11-24-2009, 06:56 AM | #57 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
|
|
11-24-2009, 11:55 AM | #58 |
Drives: Yaris RUSH HatchBack Join Date: Jan 2009
Location: Perth, WA
Posts: 80
|
thanks a lot...
i tried and it WORKS..... thank scott |
12-05-2009, 01:33 PM | #59 |
Joined 3/08 ... really
|
Thankyou ThankYou THANKYOU!!!
__________________
|
12-06-2009, 02:45 AM | #60 |
Drives: Yaris RUSH HatchBack Join Date: Jan 2009
Location: Perth, WA
Posts: 80
|
thanks CTscott for ya Helpsssss,
here is the link of my Final product. u may have a look. http://www.yarisworld.com/forums/showthread.php?t=24210 Last edited by charleschia1986; 12-06-2009 at 10:26 PM. |
12-22-2009, 07:45 PM | #61 |
Drives: 2007 Yaris 4dr Sedan Base Join Date: Nov 2009
Location: Boston, MA
Posts: 18
|
Thank you, The Architect. I installed a remote starter today, first one i have ever done. It works great! I could not have done it without this thread.
|
12-22-2009, 10:23 PM | #62 |
やりすぎだ~
|
Hi all. Is there a place I can tap into the engine bay for turn signals besides the wires that lead to the signal lamps?
|
12-22-2009, 11:08 PM | #63 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
Conn B13.jpg |
|
01-21-2010, 01:35 AM | #64 |
やりすぎだ~
|
One more question, where can I tap in for the parking lights - the lights that go on just before I turn on the headlights?
|
01-21-2010, 11:32 PM | #65 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
|
01-22-2010, 01:50 AM | #66 |
やりすぎだ~
|
Sorry, should've made my question a bit clearer. I'm looking to see if there is one in the fuse box like the one pictured above.
|
01-22-2010, 06:22 AM | #67 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
In the fuse panel, it is pin 3 on Connector B13, which is the green wire next to the two red wires in my picture above. If you don't have fogs installed, the place where the two reds are in my picture will be empty on yours.
|
06-09-2010, 10:47 AM | #68 | |
Quote:
Hi to all... just a noob here in M.E., just wondering if I tap the leads (+,-) of an LED light to the pink n blue from that pic above, will the new led light acts the same as the dome light? will the new led light dim to off as well upon turning off the ignition? Or just turns on when the doors were open? Sorry to much question. Need help where I can tap my led lights so that it behaves the same like the dome light, using its switch also to turn on my led lights underneath. Thanks so much. -jon |
||
06-09-2010, 11:02 AM | #69 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
|
|
06-09-2010, 04:56 PM | #70 |
Thanks CTScott... got the idea!
|
|
09-21-2010, 03:42 PM | #71 |
Drives: Yaris 1.4 D4-D Join Date: Aug 2010
Location: Italy
Posts: 5
|
hi can someone please tell me what are these cables found under the hand brake?
it's an european model. thanks http://img337.imageshack.us/g/19072009030.jpg/ |
09-21-2010, 08:22 PM | #72 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 07:50 AM |
DIY Cruise Control FAQ (2006-2010 Yaris) | CTScott | DIY / Maintenance / Service | 467 | 10-18-2022 10:20 AM |
2012 Yaris at SEMA | Jason@SportsCar | Third Gen Yaris General Discussion | 5 | 09-23-2013 03:55 AM |
New Yaris race car | Jason@SportsCar | Tracking, Racing, Auto-X Forum | 83 | 11-01-2012 02:32 PM |