![]() |
![]()
![]() |
![]() |
#19 |
First time DIYer
|
This will be my next project. You've been bookmarked/saved/and printed for reference
![]() ![]()
__________________
LED tails - debadged - 17" wheels - LED door handles - Painted Headlights - 30/35% tint - Blue LED Interior - DIY Cruise Control - Python 460HP Alarm - DIY Power Locks - K&N CAI - Lowering Springs |
![]() |
![]() |
![]() |
#20 |
Yes- I fit in it.
|
Awesome job !
![]()
__________________
I'm surprised it doesn't have a pull-start ! |
![]() |
![]() |
![]() |
#21 |
I've made a post!
Drives: 2007 Toyata Yaris Join Date: Jul 2010
Location: Nashvill, TN
Posts: 1
|
How did you do the DIY Cruise Control and DIY Power locks?!! Please share!
LED tails - debadged - 17" wheels - LED door handles - Painted Headlights - 30/35% tint - Blue LED Interior - DIY Cruise Control - Python 460HP Alarm - DIY Power Locks - K&N CAI - TRD Lowering Springs |
![]() |
![]() |
![]() |
#22 |
Bronze bombshell yaris
Drives: 09 Yaris HB 3door Join Date: Sep 2010
Location: Oklahoma City, OK
Posts: 641
|
I will be doing this either this weekend or sometime Christmas week that I have off. (The red neoprene looks great)
Has anyone who's done this figured out a way not to break the trim piece near the back of the door? If not, the DIY is a little vague on reattachment where its broken. What kind of screws are used, where can you get them, and do you need to pre-drill? Also, is the headliner spray something you can pick up at any Autozone? Thanks for the DIY! PS> Where would one pick up those smart TRD emblems?
__________________
Now I drive a CARMINE RED METALLIC 09 Yaris 3-door!! I'm Back!!! WooHoo!! Mods done so far: Tinted windows, Viper 211HV Remote Keyless Entry, Atoto Android headunit, backup camera, steering wheel controls ![]() |
![]() |
![]() |
![]() |
#23 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
On my 5 door, the rear door panels did need to be separated. For them, I drilled the welded plastic bosses with a large diameter countersink bit (3/4") to break them free. To reassemble that section I used some 3/4" long lath screws (wood screws with a large washer-like head, bought at Lowes) to reconnect the two parts. Here's my thread with a picture of what I am describing: http://www.yarisworld.com/forums/sho...her+door+panel For the adhesive, 3M super 77 is available at any auto parts store, and is also sold at home improvement stores.
__________________
![]() |
|
![]() |
![]() |
![]() |
#24 |
![]() ![]() Drives: 2008 Yaris HB Join Date: Nov 2010
Location: Mount Royal, NJ
Posts: 56
|
looks nice.... i like the stock pattern, but that looks NICE!
|
![]() |
![]() |
![]() |
#25 |
#1 Lemming
Drives: Light Blue '08 Yaris Join Date: Mar 2010
Location: Milwaukee, WI
Posts: 760
|
This needs a sticky! Great DIY, well written, good pictures...thanks for the addition!
__________________
|
![]() |
![]() |
![]() |
|
|