FS: OEM Cruise Control Stalk with Wire and Screws - Page 3 - Toyota Yaris Forums

CTScott · 10-16-2011, 07:07 PM

Quote:

Originally Posted by kz27

hello, do you have any parts left for sale?

Yes.

yrsgirl · 10-16-2011, 08:26 PM

hey ctscott, i have the stalk already but am looking for the other items that i would need to make this work. ie pins and wires. can you hook me up?
thanks

CTScott · 10-16-2011, 09:04 PM

Quote:

Originally Posted by yrsgirl

hey ctscott, i have the stalk already but am looking for the other items that i would need to make this work. ie pins and wires. can you hook me up?
thanks

Yes. I'll PM you with info.

Chuckinator · 11-19-2011, 11:10 PM

Hey CTScott, I'm interested in installing cruise control on my 2007 automatic sedan. Do you happen to have any parts left for sale? I don't have anything right now, so I believe I would need the stalk, stalk wire, and the necessary pins.

I'm also interested in your custom indicator, if you are still producing those.

CTScott · 11-20-2011, 12:16 AM

Quote:

Originally Posted by Chuckinator

Hey CTScott, I'm interested in installing cruise control on my 2007 automatic sedan. Do you happen to have any parts left for sale? I don't have anything right now, so I believe I would need the stalk, stalk wire, and the necessary pins.

I'm also interested in your custom indicator, if you are still producing those.

Yes. I still have all of the parts available. I will PM you with details on what you need for your car.

SimTronik · 11-21-2011, 08:41 PM

I don't have any cruise control on my car is this all i need?
I'd like one and all i need to make it work. Can you PM details, i'll send you a payment via paypal.

Thanks.
I'M from Quebec, canada

CTScott · 11-21-2011, 10:26 PM

Quote:

Originally Posted by SimTronik

I don't have any cruise control on my car is this all i need?
I'd like one and all i need to make it work. Can you PM details, i'll send you a payment via paypal.

Thanks.
I'M from Quebec, canada

PM sent.

Grimsby53 · 11-22-2011, 06:40 PM

I'm also interested in a turn-key kit for an 07 3-dr hatch, manual transmission.

PM me with price, and payment details, please.

The Spectacle · 11-30-2011, 10:46 PM

PM'd

SimTronik · 12-01-2011, 08:11 PM

I just received it.
I don't understand the Yaris w/ power or without part in the manual. Can you explain? Thx.

CTScott · 12-01-2011, 08:42 PM

Quote:

Originally Posted by SimTronik

I just received it.
I don't understand the Yaris w/ power or without part in the manual. Can you explain? Thx.

That is with or without the factory power package, which includes power locks and windows.

SimTronik · 12-01-2011, 09:02 PM

Oh great i have all that. Hope it make the install easier :D

SimTronik · 12-01-2011, 09:08 PM

So i'm missing: Connector D3 Pins, quantity 2 (82998-12870) and Lower Steering wheel Boss (cover) (with the hole already in it for the cruise stalk {If you
don’t wish to drill the exiting one}):45184-52130-B0 and ¼” Ring terminal for 18-22 AWG wire (if required to terminate added D3 ground pin).

If i get it right...
I own a Yaris sedan 2010 w/ power.
(ok ok i could drill the existing steering)

CTScott · 12-01-2011, 09:28 PM

Quote:

Originally Posted by SimTronik

So i'm missing: Connector D3 Pins, quantity 2 (82998-12870) and Lower Steering wheel Boss (cover) (with the hole already in it for the cruise stalk {If you
don’t wish to drill the exiting one}):45184-52130-B0 and ¼” Ring terminal for 18-22 AWG wire (if required to terminate added D3 ground pin).

If i get it right...
I own a Yaris sedan 2010 w/ power.
(ok ok i could drill the existing steering)

Did you verify that the D3 pins are not present? A 2010 Sedan with power should have them.

SimTronik · 12-01-2011, 09:35 PM

Oh ok, not checked yet.
Removing the wheel looks like a hard job for a beginner :S

CTScott · 12-01-2011, 09:37 PM

Quote:

Originally Posted by SimTronik

Oh ok, not checked yet.
Removing the wheel looks like a hard job for a beginner :S

You only have to remove the wheel if you are replacing the lower boss with the pre-holed one. You can mark and drill your existing one in place.

SimTronik · 12-01-2011, 11:46 PM

Really! I was planing to drill the hole after all. I read all the manual pdf and i was lost at the wheel and air bag removal and i though it was kinda risky. But it seems more plug n play. Can you guide me to what part of the installation manual is pertinent for me? Thanks a lot!

CTScott · 12-01-2011, 11:54 PM

Quote:

Originally Posted by SimTronik

Really! I was planing to drill the hole after all. I read all the manual pdf and i was lost at the wheel and air bag removal and i though it was kinda risky. But it seems more plug n play. Can you guide me to what part of the installation manual is pertinent for me? Thanks a lot!

Section 1.1 for the airbag removal

Section 1.3 for the lower boss hole drilling

Section 1.4 up to 1.4.2 for the stalk and wire installation

Section 1.5 for re-installing the airbag

Section 2.1 to verify the presence of the connector D3 pins

11-30-2011, 10:46 PM	#9
The Spectacle View User's Garage Drives: 08 BSP LB Join Date: Oct 2008 Location: Tampa, FL Posts: 218	PM'd __________________

12-01-2011, 09:08 PM	#13
SimTronik Machinist View User's Garage Drives: Yaris sedan 2010 Join Date: Sep 2010 Location: Sts-Anges, Quebec, canada Posts: 198	So i'm missing: Connector D3 Pins, quantity 2 (82998-12870) and Lower Steering wheel Boss (cover) (with the hole already in it for the cruise stalk {If you don’t wish to drill the exiting one}):45184-52130-B0 and ¼” Ring terminal for 18-22 AWG wire (if required to terminate added D3 ground pin). If i get it right... I own a Yaris sedan 2010 w/ power. (ok ok i could drill the existing steering) Last edited by SimTronik; 12-01-2011 at 09:19 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Cruise Control FAQ (2006-2010 Yaris)	CTScott	DIY / Maintenance / Service	468	11-19-2024 04:45 PM
Cruise control install 2009 Yaris 3 door	PeteZNY	DIY / Maintenance / Service	125	03-31-2024 10:22 AM
DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag	CTScott	DIY / Maintenance / Service	307	04-04-2023 04:43 AM
Can we do this? (aka The DIY Cruise Control Thread)	mrbond	DIY / Maintenance / Service	502	07-22-2017 03:57 PM
This is pretty frikken stupid - Yaris '07 LB auto cruise control	firemachine69	DIY / Maintenance / Service	10	07-20-2010 09:09 AM

10-16-2011, 08:26 PM	#2
yrsgirl Drives: 07 yaris two door liftback Join Date: Jul 2011 Location: south central PA Posts: 55	hey ctscott, i have the stalk already but am looking for the other items that i would need to make this work. ie pins and wires. can you hook me up? thanks

11-19-2011, 11:10 PM	#4
Chuckinator I've made a post! Drives: 2007 Yaris Sedan Join Date: Nov 2011 Location: Indiana Posts: 1	Hey CTScott, I'm interested in installing cruise control on my 2007 automatic sedan. Do you happen to have any parts left for sale? I don't have anything right now, so I believe I would need the stalk, stalk wire, and the necessary pins. I'm also interested in your custom indicator, if you are still producing those.

11-21-2011, 08:41 PM	#6
SimTronik Machinist View User's Garage Drives: Yaris sedan 2010 Join Date: Sep 2010 Location: Sts-Anges, Quebec, canada Posts: 198	I don't have any cruise control on my car is this all i need? I'd like one and all i need to make it work. Can you PM details, i'll send you a payment via paypal. Thanks. I'M from Quebec, canada

11-22-2011, 06:40 PM	#8
Grimsby53 I've made a post! Drives: 07 Yaris 3dr MT (bayou blue) Join Date: Nov 2011 Location: Tampa, FL Posts: 1	I'm also interested in a turn-key kit for an 07 3-dr hatch, manual transmission. PM me with price, and payment details, please.

12-01-2011, 08:11 PM	#10
SimTronik Machinist View User's Garage Drives: Yaris sedan 2010 Join Date: Sep 2010 Location: Sts-Anges, Quebec, canada Posts: 198	I just received it. I don't understand the Yaris w/ power or without part in the manual. Can you explain? Thx.

12-01-2011, 09:02 PM	#12
SimTronik Machinist View User's Garage Drives: Yaris sedan 2010 Join Date: Sep 2010 Location: Sts-Anges, Quebec, canada Posts: 198	Oh great i have all that. Hope it make the install easier :D

12-01-2011, 09:35 PM	#15
SimTronik Machinist View User's Garage Drives: Yaris sedan 2010 Join Date: Sep 2010 Location: Sts-Anges, Quebec, canada Posts: 198	Oh ok, not checked yet. Removing the wheel looks like a hard job for a beginner :S

12-01-2011, 11:46 PM	#17
SimTronik Machinist View User's Garage Drives: Yaris sedan 2010 Join Date: Sep 2010 Location: Sts-Anges, Quebec, canada Posts: 198	Really! I was planing to drill the hole after all. I read all the manual pdf and i was lost at the wheel and air bag removal and i though it was kinda risky. But it seems more plug n play. Can you guide me to what part of the installation manual is pertinent for me? Thanks a lot!