DIY Cruise Control for 2012 Yaris - Good News! - Page 12 - Toyota Yaris Forums

CTScott · 08-04-2015, 07:09 PM

Quote:

Originally Posted by meszar

Brown - 0
Grey (right of brown) - 5 - 5,5

Interesting. I have not had the opportunity to measure the voltage on the CCS wire of a third generation Yaris, so the 5V, rather than 12V might be OK.

Try jumping the brown to the grey with the Ignition ON, but engine off (you can use a bent paper clip or small piece of wire). If you touch those two terminal together briefly you should be able to toggle the cruise control symbol on and off on the cluster, if it works.

panosvo · 08-04-2015, 11:47 AM

In my Toyota Yaris D4D 2013/05 model STYLE TYPE- NLP130L-CHFSXW, everything is in place, even the clutch switch s in place, but unfortunately the pin1,2 voltage is not there. So the ECM does not have the cruise control function in it. Is there a way to add it? Just wonder

Here are the photos!

ghidz · 08-09-2015, 11:26 AM

Hi, sorry for my english, i'm italian. I've bought this cruise control

http://pages.ebay.com/link/?nav=item...obalID=EBAY-IT

I've checked all the cable and they seems to be ok but the cruise is not working.
If anyone of you can help me will make me very very happy :)

I drive a 2013 Toyota yaris 1.0L

panayiotis · 04-12-2016, 08:58 AM

hello.i have a 2016 1.33-VVTi Active 1NR-FE automatic eur model right hand drive.does anyone know if i only need the stalk?

CTScott · 04-12-2016, 07:40 PM

Quote:

Originally Posted by panayiotis

hello.i have a 2016 1.33-VVTi Active 1NR-FE automatic eur model right hand drive.does anyone know if i only need the stalk?

Correct - You just need the stalk and the replacement steering wheel side trim piece.

CTScott · 08-09-2015, 06:33 PM

As far as I am aware, the 1.0L does not have the ECM programming for cruise control.

ghidz · 08-09-2015, 07:51 PM

Oh hell. What happen if i go to the dealer? can they reprogram the ecm or is not possible?

CTScott · 08-09-2015, 08:04 PM

Quote:

Originally Posted by ghidz

Oh hell. What happen if i go to the dealer? can they reprogram the ecm or is not possible?

No. You would need an aftermarket cruise control system, which can be quite costly.

texascolt45 · 09-14-2015, 01:00 PM

anyone try this on a 2015 1.5 liter L model with an auto trans?i'm curious to know if it will activate the cruise.

CTScott · 09-14-2015, 05:34 PM

Quote:

Originally Posted by texascolt45

anyone try this on a 2015 1.5 liter L model with an auto trans?i'm curious to know if it will activate the cruise.

Yes. I have sold quite a few kits to people with 2015s.

850spdr · 09-15-2015, 05:22 PM

Hi-
I have a 2013 Yaris which has a no start will crank problem. My ECM connector configuration and pinouts are different from those on the TIS documentation.
Is there some way I can get valid connector drawings and signal lists? My ECM is a 89661-52R40.
thanks

CTScott · 09-15-2015, 06:02 PM

Quote:

Originally Posted by 850spdr

Hi-

I have a 2013 Yaris which has a no start will crank problem. My ECM connector configuration and pinouts are different from those on the TIS documentation.

Is there some way I can get valid connector drawings and signal lists? My ECM is a 89661-52R40.

thanks

Please post a separate thread instead of hijacking an unrelated one.

doller · 12-19-2015, 11:52 AM

Hi
which Toyota part number cc stalk do you yaris sorcerers recommend for my 2015 yaris 1,33 vv-t ?
thumbs up from denmark

wow first post

nikatsgr · 01-07-2016, 05:44 AM

sorry for my poor english.first time in forum.In my Toyota Yaris D4D 2012/07 model STYLE TYPE- NLP130L-CHFSXW, everything is in place,and the clutch switch s in place in the pin 1-2 ihave 5 volts in grey wire and 0 in brown i have put a used oem cc switch and did not work!!i have read that european yaris not support cruise control.is it definately???any solution???thanks any way!!!!!

marspike · 01-07-2016, 01:24 PM

Quote:

Originally Posted by nikatsgr

sorry for my poor english.first time in forum.In my Toyota Yaris D4D 2012/07 model STYLE TYPE- NLP130L-CHFSXW, everything is in place,and the clutch switch s in place in the pin 1-2 ihave 5 volts in grey wire and 0 in brown i have put a used oem cc switch and did not work!!i have read that european yaris not support cruise control.is it definately???any solution???thanks any way!!!!!

I have same engine, but mine was product in end 2013 (Business). And mine was delivered with factory CCS whose worked. Two thing, once your CCS was not plug on pin 40 to the ECM. Or second possibility your ECM was not progammed for a cruise control switch.
ECM is a metal box located under the hood in difficult access behind secondary fuse box in right passager side.

nikatsgr · 01-08-2016, 06:32 AM

ok i will search for pin 40 and if is not pluged anything what shall i plug on it???and second
can i reprogramm my ecm (not me offcourse)or something is missing from ecm?

kevinj93 · 01-15-2016, 08:29 PM

Big thanks to CTSCOTT for letting us know this was possible. I have just fitted cruise control to my 2012 Austrailan 1.3L yaris. I only bought the Yaris recently as a second car, and was nearly put off the purchasr because of the lack of cruise control. I found a switch on eBay for AU$17 delivered for whatwas a $650 option in 2012.

For the 2012 model with steering wheel audio controls you don't need to disconnect the battery or airbag, but it's a good idea to remove the horn fuse from the fuse box next to the battery when you go to push the central airbag and horn button back on to the wheel. If you don't the horn will sound when you push the airbag unit back on to the montings.

amit87 · 02-03-2016, 06:04 PM

OK I finally done mine! I am from the UK, I ordered the cover part from toyota (part# 45186-0d030-C0 (C0 = black) and cost me £5.60 inc VAT.

I ordered a non OEM stalk off ebay for cheap but hopefully will last and looks/works/feels OEM.

So disconnected the battery, removed airbag, put it all in, put all back together.. DONE! How long did it take... 10min? 15min? 20min? 30min?... nope! 1 whole hour!!!!! thats start to finish. 45min of that was battling the airbag clips!

My car is a 2013 (MY63) Yaris SR 1.33 Manual 5door. It already had the secondary clutch switch etc so literally was plug and play. When connected battery, only thing that rest was the clock, the touch&go even resumed my song so dont worry about having to set everything again, just the clock!

The first clip of the airbag was easy, small screw driver and push and it pops out. The other two... well lets just say I couldnt pull the clips down, they are tougher than I thought! How I got it out eventually was by pushing down in the plastic clips of the airbag which some how released both but this is easier said then done! I was violent so dont be scared, nothing will break as long as you know what you're jabbing. To help me get more access I also removed the steering wheel buttons trim by un doing two screws (1 is oposite the other and are obvious). It wouldnt come off as the airbag was still clipped in but I could pull it off enough to get more access. Thats my tip!

08-04-2015, 11:47 AM	#2
panosvo I've made a post! Drives: Yaris 2013 Diesel Active Join Date: Jul 2015 Location: Greece Posts: 2	In my Toyota Yaris D4D 2013/05 model STYLE TYPE- NLP130L-CHFSXW, everything is in place, even the clutch switch s in place, but unfortunately the pin1,2 voltage is not there. So the ECM does not have the cruise control function in it. Is there a way to add it? Just wonder Here are the photos! Last edited by panosvo; 08-06-2015 at 02:33 AM.

08-09-2015, 06:33 PM	#6
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	As far as I am aware, the 1.0L does not have the ECM programming for cruise control. __________________

09-15-2015, 05:22 PM	#11
850spdr Drives: 2013 Yaris 4d Join Date: Jul 2015 Location: Florida Posts: 7	ECM pinouts question Hi- I have a 2013 Yaris which has a no start will crank problem. My ECM connector configuration and pinouts are different from those on the TIS documentation. Is there some way I can get valid connector drawings and signal lists? My ECM is a 89661-52R40. thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
NEED ENGINE CHECK LIGHT CODE LIST	Attitude	Forced Induction Forum	12	04-11-2011 07:38 PM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 12:59 PM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 05:54 PM

08-09-2015, 11:26 AM	#3
ghidz Drives: Yaris 1.0 Join Date: Aug 2015 Location: Italy Posts: 2	Hi, sorry for my english, i'm italian. I've bought this cruise control http://pages.ebay.com/link/?nav=item...obalID=EBAY-IT I've checked all the cable and they seems to be ok but the cruise is not working. If anyone of you can help me will make me very very happy :) I drive a 2013 Toyota yaris 1.0L

04-12-2016, 08:58 AM	#4
panayiotis Drives: yaris 2016 Join Date: Apr 2016 Location: cy Posts: 7	hello.i have a 2016 1.33-VVTi Active 1NR-FE automatic eur model right hand drive.does anyone know if i only need the stalk?

08-09-2015, 07:51 PM	#7
ghidz Drives: Yaris 1.0 Join Date: Aug 2015 Location: Italy Posts: 2	Oh hell. What happen if i go to the dealer? can they reprogram the ecm or is not possible?

09-14-2015, 01:00 PM	#9
texascolt45 Drives: 2015 yaris Join Date: Aug 2015 Location: groves texas Posts: 78	anyone try this on a 2015 1.5 liter L model with an auto trans?i'm curious to know if it will activate the cruise.

12-19-2015, 11:52 AM	#13
doller I've made a post! Drives: '15 fire red yaris 1,33 vvt t2 Join Date: Dec 2015 Location: denmark Posts: 1	Hi which Toyota part number cc stalk do you yaris sorcerers recommend for my 2015 yaris 1,33 vv-t ? thumbs up from denmark wow first post

01-07-2016, 05:44 AM	#14
nikatsgr Drives: yaris diesel 2012 Join Date: Jan 2016 Location: greece Posts: 2	sorry for my poor english.first time in forum.In my Toyota Yaris D4D 2012/07 model STYLE TYPE- NLP130L-CHFSXW, everything is in place,and the clutch switch s in place in the pin 1-2 ihave 5 volts in grey wire and 0 in brown i have put a used oem cc switch and did not work!!i have read that european yaris not support cruise control.is it definately???any solution???thanks any way!!!!!

01-08-2016, 06:32 AM	#16
nikatsgr Drives: yaris diesel 2012 Join Date: Jan 2016 Location: greece Posts: 2	ok i will search for pin 40 and if is not pluged anything what shall i plug on it???and second can i reprogramm my ecm (not me offcourse)or something is missing from ecm?

01-15-2016, 08:29 PM	#17
kevinj93 Drives: 2013 NCP130 Join Date: Nov 2015 Location: Sydney, Australia Posts: 386	Big thanks to CTSCOTT for letting us know this was possible. I have just fitted cruise control to my 2012 Austrailan 1.3L yaris. I only bought the Yaris recently as a second car, and was nearly put off the purchasr because of the lack of cruise control. I found a switch on eBay for AU$17 delivered for whatwas a $650 option in 2012. For the 2012 model with steering wheel audio controls you don't need to disconnect the battery or airbag, but it's a good idea to remove the horn fuse from the fuse box next to the battery when you go to push the central airbag and horn button back on to the wheel. If you don't the horn will sound when you push the airbag unit back on to the montings.

02-03-2016, 06:04 PM	#18
amit87 Drives: MY63 Toyota Yaris 1.33SRManual Join Date: Oct 2013 Location: UK Posts: 8	OK I finally done mine! I am from the UK, I ordered the cover part from toyota (part# 45186-0d030-C0 (C0 = black) and cost me £5.60 inc VAT. I ordered a non OEM stalk off ebay for cheap but hopefully will last and looks/works/feels OEM. So disconnected the battery, removed airbag, put it all in, put all back together.. DONE! How long did it take... 10min? 15min? 20min? 30min?... nope! 1 whole hour!!!!! thats start to finish. 45min of that was battling the airbag clips! My car is a 2013 (MY63) Yaris SR 1.33 Manual 5door. It already had the secondary clutch switch etc so literally was plug and play. When connected battery, only thing that rest was the clock, the touch&go even resumed my song so dont worry about having to set everything again, just the clock! The first clip of the airbag was easy, small screw driver and push and it pops out. The other two... well lets just say I couldnt pull the clips down, they are tougher than I thought! How I got it out eventually was by pushing down in the plastic clips of the airbag which some how released both but this is easier said then done! I was violent so dont be scared, nothing will break as long as you know what you're jabbing. To help me get more access I also removed the steering wheel buttons trim by un doing two screws (1 is oposite the other and are obvious). It wouldnt come off as the airbag was still clipped in but I could pull it off enough to get more access. Thats my tip!