 |
 |
|
|
|
|
07-18-2012, 11:41 AM
|
#1 |
  
Drives: 06 5dr LE (deceased), 13 Soul Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,833
|
5mm spacer was essential with the 15" tooter has mounted. Most likely not required with the 16" you will be getting. 205/45 rubber is good.
__________________
|
|
|
|
07-18-2012, 11:47 AM
|
#2 |
|
Drives: '08 Yaris Join Date: Oct 2008
Location: Dover, Ohio
Posts: 7,606
|
I'd say to go without the spacer unless you notice the wheel hits the caliper. As WeeYari said, on a 16" - it most likely will not hit.
If it does hit, most local tire shops carry 5mm wheel spacers and they can be had for $10-$20. |
|
|
|
|
07-18-2012, 12:33 PM
|
#3 |
|
|
Ye iv seen a load of them for under ten £. Looks like il be ordering them on the 20th ish :)
Cheers Josh Last edited by Superstarjr; 07-18-2012 at 04:55 PM. |
|
|
|
|
10-12-2012, 05:28 AM
|
#4 |
|
Drives: Toyota Yaris 5-door Hatch Join Date: Jan 2009
Location: Cainta Rizal, Philippines
Posts: 3
 |
Hey guys,
Need help. Planning on changing my rims to Rota RBs also. Will a 17sx7.5 4x100 with +45 offset fit my car? Planning on wrapping them also with 205/45/17 tires. Considering also that I have lowering springs installed. Right now my car has this set-up: Rota Destiny rims that are 17s with an offset of +42 running on 205/40/17 tires. Having also the same lowering springs. With this set-up there is no rubbing whatsoever. Thanks all. https://www.facebook.com/photo.php?f...type=1&theater
__________________
|
|
|
|
 |
|
|
Hybrid Mode
