Micro Image Intake Manifold thread - Page 3 - Toyota Yaris Forums

scioncrew · 08-28-2012, 11:07 PM

manifold looks good Garm

Viperoni · 08-28-2012, 11:48 PM

Lookin good, dyno time now :D

xnamerxx · 08-29-2012, 01:55 AM

Quote:

Originally Posted by Brian O'Conner

"I need NOS, two bottles... the big ones"

Quote:

Originally Posted by Harry

"Amateurs don't use Nitrous Oxide, I've seen the way you drive you've got a heavy foot."

Bar_Red_Yaris · 08-29-2012, 12:25 AM

I so want this now!!!

cali yaris · 08-29-2012, 01:25 AM

I can probably do a 3-bolt option, but I'll need throttle body to work with. We'll get to that after the dyno and "yes or no" day.

thanks Art. Should I make a 70mm TB one?

scioncrew · 08-29-2012, 02:12 AM

Quote:

Originally Posted by cali yaris

I can probably do a 3-bolt option, but I'll need throttle body to work with. We'll get to that after the dyno and "yes or no" day.

thanks Art. Should I make a 70mm TB one?

dont see why not.

eTiMaGo · 08-29-2012, 05:54 AM

was there a danger to your manifold?

xnamerxx · 08-29-2012, 11:21 AM

I think he blew the welds on his intake manifold.

cali yaris · 08-29-2012, 01:28 PM

I think I missed something.

xnamerxx · 08-29-2012, 01:37 PM

Quote:

Originally Posted by cali yaris

I think I missed something.

This doesn't concern you go back inside.

Fast and the furious references.

justjesus · 08-29-2012, 02:07 PM

Quote:

Originally Posted by xnamerxx

I think he blew the welds on his intake manifold.

Thanks Namer. You answered Etimago's question the way I would have.
Or maybe I would have went with the floor board?

Quote:

Originally Posted by cali yaris

I think I missed something.

Oh Garm. Do I need to explain NOS to you again. hehehe

no reference to Garm, but one of my favorite t-shirts :)

cali yaris · 08-29-2012, 01:37 PM

ohhh... I should have known that. I'll go lay by my dish now.

http://www.youtube.com/watch?v=PpjOXxPka1s

Thirty-Nine · 08-29-2012, 01:50 PM

Looks great, Garm. Can't wait to see the results.

Golddeenoh · 08-29-2012, 02:28 PM

Red?

Red?

Red?

Red?

Red?

Red?

Red?

Jason@SportsCar · 08-29-2012, 02:39 PM

Forget about colors, you need to put a thermal coating on that thing that is sitting right behind the radiator. However, these days you can get all kinds of nice finishes, even colors.

http://www.jet-hot.com/coatings/jet-hot-extreme-1300/

For those that don't want to likely double the cost of the manifold with a pro coating, you can wrap it.

http://www.designengineering.com/cat...ials/cool-tape

cali yaris · 08-29-2012, 02:35 PM

LOL, you already asked that, and I already answered.

cali yaris · 08-29-2012, 02:41 PM

^ Good idea. Ceramic silver is about $100 to coat it locally.

Even after a long idle, the plenum was room temperature -- the longer runners are helping. Also, this was installed without the the thermal manifold spacer. I'd like to experiment with that as well.

Jason@SportsCar · 08-29-2012, 02:44 PM

Quote:

Originally Posted by cali yaris

^ Good idea. Ceramic silver is about $100 to coat it locally.

Even after a long idle, the plenum was room temperature -- the longer runners are helping. Also, this was installed without the the thermal manifold spacer. I'd like to experiment with that as well.

WOW, that is a great price on coating.

Hope you get the results you are looking for.

08-28-2012, 11:07 PM	#1
scioncrew Drives: SCION tC Join Date: Nov 2008 Location: HB Posts: 99	manifold looks good Garm __________________ 05 Scion tC allmotor 350+ hp 9.34@144mph 05 Scion tC sfwd 880hp 9.96@147mph 05 Scion xB 280hp 12.97@104mph 07 Toyota Yaris 357hp 12.80@107mph

08-28-2012, 11:48 PM	#2
Viperoni Drives: 2005 Toyota Echo Join Date: Aug 2010 Location: Brampton, ON Posts: 505	Lookin good, dyno time now :D __________________ 2006 Saturn Ion Redline 2005 Toyota Echo RS 4dr hatch - Cyl #3 bad - sold 2000 Toyota Echo 2dr coupe - The track car - rusty & scrapped

08-29-2012, 01:25 AM	#5
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	I can probably do a 3-bolt option, but I'll need throttle body to work with. We'll get to that after the dyno and "yes or no" day. thanks Art. Should I make a 70mm TB one? __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-29-2012, 05:54 AM	#7
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	was there a danger to your manifold? __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

08-29-2012, 01:28 PM	#9
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	I think I missed something. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-29-2012, 12:25 AM	#4
Bar_Red_Yaris Drives: 2009 Yaris sedan Join Date: Jun 2011 Location: Puerto Rico, Oeste Posts: 39	I so want this now!!!

08-29-2012, 11:21 AM	#8
xnamerxx 0-60 in slow Drives: light blue liftback Join Date: Aug 2009 Location: so cal Posts: 926	I think he blew the welds on his intake manifold.

08-29-2012, 01:37 PM	#12
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	ohhh... I should have known that. I'll go lay by my dish now. http://www.youtube.com/watch?v=PpjOXxPka1s __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-29-2012, 01:50 PM	#13
Thirty-Nine Small cars are a big deal View User's Garage Drives: 2007 Yaris Liftback Join Date: Feb 2006 Location: Portland, OR Posts: 3,144	Looks great, Garm. Can't wait to see the results. __________________ Subcompact Culture: The Small car blog

08-29-2012, 02:28 PM	#14
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	Red? Red? Red? Red? Red? Red? Red? __________________ mods:15''Drag DR21 w/Nitto NeoGen 205/50R15, Tanabe DF210 lowering springs 1.6/1.8, TRD Rear Sway Bar, Tanabe Front Sway Bar, Micro Image Short Throw Shift Kit (both in and under), 8.64lbs flywheel, F1 Stage 4 Clutch, AEM Cold Air Intake (Red), Megan Racing Header, DC Sports Axle Back Exhaust, Micro Image Crank Pulley, NST lite Alternator Pulley, ARP Manifold Stud Kit,Tanabe Front Strut Tower Brace, ScanGuage II, Micro Image Silicone Radiator Hose Kit (Red), NRG Carbon Fiber Shift Knob (round), 2009-2011 Toyota Yaris Liftback Foglight kit, NRG Grounding Kit (Red), Hella Horns(Red),CF Hood

08-29-2012, 02:39 PM	#15
Jason@SportsCar Drives: 2015 H Production Yaris Join Date: Oct 2009 Location: Debary, FL Posts: 1,953	Forget about colors, you need to put a thermal coating on that thing that is sitting right behind the radiator. However, these days you can get all kinds of nice finishes, even colors. http://www.jet-hot.com/coatings/jet-hot-extreme-1300/ For those that don't want to likely double the cost of the manifold with a pro coating, you can wrap it. http://www.designengineering.com/cat...ials/cool-tape __________________ 2005-2008 SCCA Solo BS National Champion 2017-2018 SCCA H Prod National Champion

08-29-2012, 02:35 PM	#16
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	LOL, you already asked that, and I already answered. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-29-2012, 02:41 PM	#17
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	^ Good idea. Ceramic silver is about $100 to coat it locally. Even after a long idle, the plenum was room temperature -- the longer runners are helping. Also, this was installed without the the thermal manifold spacer. I'd like to experiment with that as well. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mid-West Chapter Micro Image Car Club	lilredrocket	Southwest	10	10-05-2009 02:06 PM
Turbo Manifold thread	Sabretooth	Forced Induction Forum	78	05-22-2009 07:52 AM
Yaris Intake Manifold	richardholdener	Performance Modifications	201	05-18-2009 12:58 PM
Intake Manifold Gasket?	Nexus1155	DIY / Maintenance / Service	6	11-18-2008 09:03 PM
Official Richard Holdener MID-RANGE Intake Manifold List	WolfWings	Performance Modifications	59	11-14-2008 12:26 AM