|
08-15-2014, 07:56 AM | #1 |
Drives: 08 Sedan Join Date: Oct 2008
Location: Toronto
Posts: 301
|
Rumble when applying brakes
Hey guys
I replaced my pads (oem) with a set of beck rotors last year and I have developed a bit of a rubble in the car when I apply the brakes, but it only happens between 60km to 50km hour when I am slowing the car down... I don't feel any pulsing in the peddle, but the car will rubble a but only at that speed... I don't think it's an issue with the rear drums as i had the issue before and after as i recently replaced my shoes and rear drums... Thanks guys Sent from my Z10 using Tapatalk |
08-17-2014, 01:08 PM | #2 |
Drives: 2007 red Yaris HB AT Join Date: Dec 2013
Location: southeast USA
Posts: 197
|
I had that in my RAV4 recently (although at much lower speeds) and it turned out pads were wearing unevenly and the slide pin showed some abnormal wear. I assumed from lack of lubrication. I lubed the pin with silicon grease and it helped so far. But I don't have much followup on this.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Strange creaking sound whenever applying brakes at stop position. | YarisSedan | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 4 | 09-04-2015 04:51 PM |
general service of brakes | TriumphAnt | DIY / Maintenance / Service | 10 | 08-07-2010 02:20 PM |
Metal scratching from brakes | alt_k1ll3r | DIY / Maintenance / Service | 16 | 02-11-2010 12:04 AM |