|
09-28-2019, 06:49 PM | #1 |
Drives: 2009 Yaris 4 DR Hatchback Join Date: Apr 2011
Location: USA
Posts: 8
|
Help w/ Auto-Dimming mirror install
Hey everyone,
Need a little advice on how to proceed. I bought a Gentex 455 years ago and never got around to installing it. I'm a newbie when it comes to electronics. So far, passed the wire harness through the a-pillar and down to the circuit panel. I bought a wire/fuse tap but, I'm not sure if I shoulda gone with a "mini" fuse tap for this install. Grounding the negative seems much easier. One last thing, my model (455) is the basic model. No compass, no temperature. Appreciate the insight. I'm going by the instructions provided here (stuck between figs. 18 & 19) - https://sc.voxxintl.com/docs/common/...VGEN20A_IM.pdf |
09-29-2019, 04:29 AM | #2 |
Yaris Hybrid Limited 2015
Drives: yaris Hybrid limited 2015 Join Date: Mar 2012
Location: Denmark
Posts: 176
|
You could use a mini fuse tap, and do like this Tow bar wiring se page 8
https://perfion.brinkgroup.eu:49354/...a1f6c7a96d254b Then you dont need to cut into any wires.
__________________
Yaris Hybrid Limited 2015 C-HR 1,8 Hybrid premium 2020 |
09-29-2019, 04:14 PM | #3 | |
Drives: 2009 Yaris 4 DR Hatchback Join Date: Apr 2011
Location: USA
Posts: 8
|
Quote:
|
|
Tags |
electrical, mirror, wiring |
|
|