|
06-12-2012, 02:51 AM | #2035 |
Roadrunner Jr.
|
Derick,
You're going to flip. I did something almost unthinkable to some on Team Hybrids. Drop an e-mail when you have a few minutes. This is going to have you scratching your head. :)
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
06-12-2012, 11:18 PM | #2036 | |
Quote:
Where in Indianapolis? I'm going to search for excuses to go jeje. Yeah I didn't think the Ultima would please your sound quality desires but it does in other ways! D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
||
06-13-2012, 11:12 AM | #2037 |
Only Happy When it Rains
|
I agree that a full hard top would be better, but I strongly disagree you would need to buy a full donor car. The WRX/STi aftermarket is gigantic, you could easily pick and choose any pieces you need, without ever owning a full car.
I've never been a fan of V-8's. Just not my thing. A turbo Supra still would be my favorite. Straight six and as much hp as you really could ever want. The top ones put out 1200+. Or if I could stuff a EVO 4g64 into an awd eclipse I'd do that. I just love the designs of the old gen awd eclipses. I think for a full sq sound car something like a Lexus IS F or a Infinity G coupe. Or of course an Audi or BMW or something like that. Mostly because anything in the luxury range will already come with a ton and a half of dampening.
__________________
Colin Chapman disciple |
06-13-2012, 01:40 PM | #2038 |
Roadrunner Jr.
|
I hear you on the 6-cylinder thing. Just a fan of the 8's...more potential on all levels as I see it. It'll take less involvement on an 8 for me to see a 600+ HP normally aspirated...no lag, no loss. Fuel? That's something else. The whole idea of the Ultima is just for a weekender/track day car that can be driven on the street and that can lay down some serious lap times compared to the exotics for a heck of a lot less coin.
As for picking...you still have to pick. Regardless of where you get it. That will cost. Yes, it will probably be less than 60K though, admittedly. More like 30-40 I'm thinking. There's just something about a rolex series type car with a nice 8 in it that floats my boat. SQ car? not without some serious modification...I wouldn't do that.
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
06-13-2012, 01:42 PM | #2039 |
Roadrunner Jr.
|
@ Derick...
That JVC HU is out ASAP. It doesn't even compare to the output on our decks.
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
06-18-2012, 02:24 AM | #2040 |
Took the family for a ride! we all end up singing "Rock A Bye Your Bear" The Wiggles
even kids music sounds pretty good. D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
07-07-2012, 12:07 AM | #2041 |
mmm sq system can be addictive, and dangerous... some times when cruising on the high way, I just loose notion of where I'm am, dam music makes the car disappear and makes me feel I'm somewhere else! LOL
D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
07-07-2012, 12:10 AM | #2042 |
BTW,...
I've been playing with the left side tweeter, you guys are not going to believe what I'm trying to do! Stage getting wider and deeper! D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
07-07-2012, 09:21 AM | #2043 |
Roadrunner Jr.
|
Do tell...Pictures are appropriate as well. :)
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
07-08-2012, 12:17 AM | #2044 |
No pictures today, still a secrete but I'm cutting metal again!
D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
07-08-2012, 02:02 AM | #2045 |
OK, I'm going to need help! (advice)
I'm trying to dig in the tweeter in the a-pillar into the metal, so how do I cut a round circle there? I did a few holes with a small bit just to check I get the clearance in the back and there are no structural members. Why I'm doing this? is because I'm physically moving the tweeter's position by 3.5 inches forward and almost 2 inches towards the left side, I'm loosing about 3-4 inches of height but I did try the tweeter and stage still up high, so that I don't mind, but... the fact that the stage got wider and deeper from actual location the end result it's very satisfactory, so I really would like to sink in this tweeter there, any advice is welcome! I guess I need a special tool? These pictures show the left a-pillar and the round wood peace represents the circle I want to cut away: D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
07-08-2012, 10:40 AM | #2046 |
Roadrunner Jr.
|
How were you cutting the hole? That angle is tricky because of the glass.
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
07-08-2012, 05:27 PM | #2047 |
I was thinking of making a series of holes around the perimeter then try to trim the imperfections with a dremel, but it's so hard to do each hole. I was hopping to find a good tool that would make my life easier.
D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
07-08-2012, 06:33 PM | #2048 |
Drives: 2007 White Toyota Yaris Type S Join Date: Dec 2006
Location: Southern California
Posts: 439
|
Why not just use a hole saw.. It looks like there is enough room to get a drill in there..
http://www.homedepot.com/h_d1/N-5yc1...&storeId=10051
__________________
TRD Springs w/ KYB Struts and Shocks, Custom CAI w/ K&N filter and pre filter wrap, Weapon R Header, Stock 15 inch alloys, Dezod Performance pads, Tanabe Front Strut Bar, 35% front door Tint and 20% Rear doors back Tint, De-Badged Ass, Custom painted flat black interior, Pioneer deh-p6700bt w/ IPOD hookup, Infinity components up front with custom mounted tweeter, Inifinity 6x9's out back, 1 12" kicker comp cvr........ |
07-08-2012, 06:57 PM | #2049 |
Roadrunner Jr.
|
That proposed hole is VERY close to the glass...that's the challenge. Know that the hole is only the size of a tweeter. Can a right angle adaptor give enough torque to drive a hole saw?
The dremel idea may be the best at the moment. :) whadyamean you can't angle a sawzall in there?!? :)
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
07-08-2012, 08:19 PM | #2050 | |
Drives: 2007 White Toyota Yaris Type S Join Date: Dec 2006
Location: Southern California
Posts: 439
|
Quote:
But i get the hesitation.. I guess the dremel probably is the way you would wanna go.. And if you do try the sawzall, please get it on video!!!! haha
__________________
TRD Springs w/ KYB Struts and Shocks, Custom CAI w/ K&N filter and pre filter wrap, Weapon R Header, Stock 15 inch alloys, Dezod Performance pads, Tanabe Front Strut Bar, 35% front door Tint and 20% Rear doors back Tint, De-Badged Ass, Custom painted flat black interior, Pioneer deh-p6700bt w/ IPOD hookup, Infinity components up front with custom mounted tweeter, Inifinity 6x9's out back, 1 12" kicker comp cvr........ |
|
07-08-2012, 11:11 PM | #2051 |
Some thing like a hole saw mentioned above is what I had in mind, Yes a dremel may be the power tool, now because of the angle of the a-pillar the dremel will not be exactly perpendicular to the cut, I hope that would not be an issue.
I'll stop by tomorrow at the local store and see if I can find a hole saw that fits the size of the hole that I need. Thanks D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
07-09-2012, 02:45 AM | #2052 |
Roadrunner Jr.
|
It's not the bit I'm concerned with in using a hole saw that close to the glass...
If you think a dremel is too big, a drill body is massive...one needs to get the hole saw bit straight on just like the dremel. Can you squeeze yourself into a good place on that dash to hit the pillar straight on with either option?
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sound deadening: sq footage amount for 3dr | goku87 | In Car Entertainment + Electronics (audio / video / alarm) | 29 | 11-14-2013 12:37 PM |
2007 Yaris S Sound Deadening | sqcomp | In Car Entertainment + Electronics (audio / video / alarm) | 70 | 12-13-2010 07:40 PM |
Sound deadening | 06vitzRS | General Yaris / Vitz Discussion | 10 | 05-05-2010 01:51 PM |
Sedan Door Panel Deadening | sqcomp | In Car Entertainment + Electronics (audio / video / alarm) | 42 | 06-01-2009 02:47 PM |